CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

cyclic B.C. in Star-LT

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 9, 2006, 09:14
Default cyclic B.C. in Star-LT
  #1
hank
Guest
 
Posts: n/a
Hi, is there anyone using the Star-LT?

It's very handful for most cases. But I got problems in cyclic B.C. setting. And none of the tutorials showing the example.

Anyone has examples with cyclic B.C. (in .mdl or .mon file)?

Thanks!

  Reply With Quote

Old   September 19, 2006, 20:39
Default Re: cyclic B.C. in Star-LT
  #2
tomosada
Guest
 
Posts: n/a
I think that the match of artriby mesh surface seem hard to build.

I think that this problem is not the due to STAR-LT.

You can creat a cubic and genetate a hex mesh.

And make cyclic patch with +x and -x surface.

In my experience it work.

  Reply With Quote

Old   September 22, 2006, 11:02
Default Re: cyclic B.C. in Star-LT
  #3
hank
Guest
 
Posts: n/a
Dear Tomosada san, Thanks for response. Yes, it worked on cubic. And it worked for cylinder(one third in thida direction) as well.

But when the rotating frame is applied, it didn't work anymore.

Any comment?

Hans
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cyclic specification boger OpenFOAM Running, Solving & CFD 0 February 8, 2009 15:17
Help!cyclic boundary Bard Siemens 0 December 16, 2006 07:41
cyclic conditions Laurent FERRY Siemens 0 January 6, 2006 16:11
Cyclic or Symplane? Julie Polyakh Siemens 2 December 12, 2001 05:27


All times are GMT -4. The time now is 22:34.