CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Some parameters in Star-LT

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 1, 2006, 21:01
Default Some parameters in Star-LT
  #1
hank
Guest
 
Posts: n/a
Hi, Is there anyone using Star-LT? As far as I know, it was developed by CD Japan. It's really more user friendly, especially the Pro-Modeller. My personal idea is that the interface of Star-CD should be reconstruced according to Pro-Modeler. I believe the sale will boost.It seems Star-LT is not promoted in areas other than Asia? Is it still mantained?

If somebody using LT(Pro-Modeler) is in this forum, maybe you can help some of my questions. 1.In the .run file, we can find ' RESIDUAL TOLERANCE 'and 'CHARACTERISTIC LENGTH'. How can we set it in Pro-Modeler? 2.What's the exact definition of Residual used in LT? 3.What does the 'peizo' pressure type in presuure b.c. mean? Is it total pressure?

TKS

hank
  Reply With Quote

Old   October 5, 2006, 06:27
Default Re: Some parameters in Star-LT
  #2
Tom
Guest
 
Posts: n/a
hmmm - have seen it 7-8 years ago. wasn't that bad. I didn't know that it is still alive. but if you have a look at homepage of cd-adapco japan, it is still there.

As you said, it was developed mainly by cd-adapco japan ans icem for the asia market (i guess). for a very limited time it was also promoted in europe, but they stopped - don't know the reason.

if you need further information or help, you should contact office in japan. good luck tom
  Reply With Quote

Old   October 7, 2006, 07:13
Default Re: Some parameters in Star-LT
  #3
Ahmed
Guest
 
Posts: n/a
http://www.cdaj.co.jp/ But it is all in Japanees
  Reply With Quote

Old   October 9, 2006, 06:49
Default Re: Some parameters in Star-LT
  #4
Tom
Guest
 
Posts: n/a
yes, i know

it is just to indicate, that star-lt is still alive, at least in japan. information may be requested directly from cd-adapco japan.

tom

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDS, parameters and computations hedge FLUENT 2 August 16, 2007 06:19
Turbulence parameters Mikael Ersson Main CFD Forum 0 May 13, 2004 22:28
Parameters in multiphase ditto CFX 1 May 7, 2003 06:56
Relaxation Parameters. J. Keays Main CFD Forum 3 October 16, 2000 14:42


All times are GMT -4. The time now is 06:12.