CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

STAR-CCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 7, 2007, 10:38
Default STAR-CCM+
  #1
zoe
Guest
 
Posts: n/a
Hi,

someone is able to import grids done with in-house program (VERTEX file, CELL file, REGION file) into STAR-CCM+ ?

Thanks,

zoe
  Reply With Quote

Old   February 9, 2007, 10:29
Default Re: STAR-CCM+
  #2
tobbe
Guest
 
Posts: n/a
Read the CCM+ help file, you need a *.inp file to import vertex, cell and region files into CCM+. StarCD creates a *.inp file if you do a cdsave. If you cant create a *.inp file with your inhouse-program you can read in the files to Star-CD and do a cdsave.
  Reply With Quote

Old   February 12, 2007, 15:54
Default Re: STAR-CCM+
  #3
Charles
Guest
 
Posts: n/a
Is it possible to do it the other way around? I.e. make the grid in CCM+ and save it as .vrt .cel .bnd format? Don't ask why ...

  Reply With Quote

Old   February 12, 2007, 21:53
Default Re: STAR-CCM+
  #4
TG
Guest
 
Posts: n/a
If you want to mesh in ccm+ you can write a .ccm file that prostar can read. If you want to export that model in .vrt, .cel ... format, you can. You just can't write those files directly from ccm+.
  Reply With Quote

Old   February 13, 2007, 02:31
Default Re: STAR-CCM+
  #5
Charles
Guest
 
Posts: n/a
Thanks for that, I will give it a try. Basically trying to get meshes for Comet.
  Reply With Quote

Old   March 20, 2007, 11:47
Default Re: STAR-CCM+
  #6
clhona
Guest
 
Posts: n/a
I did it using the ngeom command in Comet. You can read ngeom files in Star-ccm+. I'm testing Star-ccm+ with some cases done with Comet but in general results are quite different...Have you also experienced problems? In wich cases?
  Reply With Quote

Old   March 20, 2007, 13:16
Default Re: STAR-CCM+
  #7
Charles
Guest
 
Posts: n/a
I haven't compared Comet and ccm+ results. I was told by a person working for Adapco that one of their clients had been doing comparisons and getting agreement within 1% ....

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to export a mesh from star design to star cd aounallah Siemens 4 March 6, 2009 07:22
Star Design to Star-CD(Prostar) AB Siemens 5 October 28, 2004 13:21


All times are GMT -4. The time now is 10:54.