CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

problem with .ngeom file

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 6, 2007, 12:19
Default problem with .ngeom file
  #1
raffap
Guest
 
Posts: n/a
Hi eveybody, I have problem to create the .ngeom file ti use provis for the post processing Below you can find the output message from pro-Star output window. "processed 1853034 cells. Matching boundaries with cell faces. Processed 55169 boundaries. Generating cyclic boundary condition. Error: Cyclic pair 205 has a serious problem:

the intersection of master and slave has more than 1 region. Error: Cyclic pair 207 has a serious problem:

the intersection of master and slave has more than 1 region. Error: Cyclic pair 476 has a serious problem:

the intersection of master and slave has more than 1 region. The program has run out of memory. The output file is not correct."

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Writing file problem vinz OpenFOAM Running, Solving & CFD 5 February 1, 2007 06:03
Problem with importing CAD file skc Siemens 3 December 4, 2006 05:37
Ngeom Crashing on Trimmed / Hexahedral Mesh Fr Ted Crilly Siemens 2 October 13, 2005 08:08
StarCCM+ ngeom files rc Siemens 2 May 10, 2005 13:45
Writing ngeom file Luca D Siemens 2 March 30, 2004 06:24


All times are GMT -4. The time now is 10:59.