CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

pro-am stuck

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 2, 2007, 22:11
Default pro-am stuck
  #1
azmir
Guest
 
Posts: n/a
Has anyone else experienced their Pro-AM stuck? I mean say u set your processes "complete" in mesh wizard then u go home and hope that it will run overnight. But when u come back next morning it was stuck in 2nd step. However, the same template processes have been done many times before (during office hours) and the whole thing should complete in 1 hour. So why was it stuck for more than 12 hours?

Earlier suggestions have been to adjust screen saver and monitor hibernating.. but still this problem occurs.

  Reply With Quote

Old   April 3, 2007, 10:21
Default Re: pro-am stuck
  #2
Tom
Guest
 
Posts: n/a
I seldom use the mesh wizard, but the few times that I have this has happened to me. The problem was an error in the surface that the wizard could not resolve. I had to either fix it by hand myself and then restart the wizard, or go back to the beginning surface and find the cad error. Tom
  Reply With Quote

Old   April 4, 2007, 08:49
Default Re: pro-am stuck
  #3
azmir
Guest
 
Posts: n/a
INtesresting. In my case, there is no surface error. All i'd have to do is come next morning, move the mouse a bit and suddenly it seems pro-am gets awaken and suddenly everything can then proceed as it should (without error). Have u encountered this "hibernating" pro-am case? I'm sure I didn't put the hibernation for montor or power of my PC ON, as earlier advised by someone.
  Reply With Quote

Old   April 4, 2007, 18:44
Default Re: pro-am stuck
  #4
Joan
Guest
 
Posts: n/a
Hi azmir, I thought that by now everybody knows, that pro-STAR acts in that way. Try a "BATCH ON" on the pro-STAR console before you start your process.

cheers
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FloWorks Solver stuck Daniel FloEFD, FloWorks & FloTHERM 3 September 17, 2008 16:20
Please help...I get stuck in an error!!!! Gordon FLUENT 4 August 26, 2008 21:39
pro-am stuck azmir Main CFD Forum 1 April 2, 2007 22:12
PLEASE PLEASE ADVICE..KINDA STUCK Nanda FLUENT 10 July 25, 2006 08:57
stuck onto wall guang ai Siemens 0 March 30, 2003 20:04


All times are GMT -4. The time now is 09:29.