CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

partial boundary(between two cylinder)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 3, 2007, 02:48
Default partial boundary(between two cylinder)
  #1
Elyor
Guest
 
Posts: n/a
Hi guys, i created couple between two cylinders with "partial boundary on" option. After coupling some partial boundary cells become empty. how i can fix that cell, any suggestions. thanks an advance.

here are that pictures.

http://www.geocities.com/elyor_1101/...hecoupling.jpg

http://www.geocities.com/elyor_1101/...hecoupling.jpg

Regards,

  Reply With Quote

Old   June 8, 2007, 05:04
Default Re: partial boundary(between two cylinder)
  #2
Mac
Guest
 
Posts: n/a
Hi...its a visualization problem. Check the grid for cracks to see if there is any dis-continuity. If you are able to write the prob and geom file, there should not be any problem.
  Reply With Quote

Old   June 8, 2007, 08:55
Default Re: partial boundary(between two cylinder)
  #3
Elyor
Guest
 
Posts: n/a
Thank you very much Mac for your answer, that is what i want to know, yes i am able to write the prob. and geom. file, also i got converge solution.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
partial derivative Rita CFX 3 May 21, 2018 07:24
Wall boundary conditions for 3d-cylinder Martin Bellmann FLUENT 1 July 11, 2008 14:04
Pls Help on DPM BC Partial Evaporation xc FLUENT 4 January 18, 2006 16:53
Partial slip boundary condition? Baicang FLUENT 0 November 13, 2005 06:48
About Partial Cyclic Boundary Condition Jiaying Xu Siemens 2 October 31, 2002 21:12


All times are GMT -4. The time now is 18:21.