Ricardo Vectis - Help me on spray details
 

hi, is there any one who knows ricardo vectis spray setup? I have got doubt how to define a direction in the Ricardo vectis.

please help me

Regards,

Hari V.B.

Re: Ricardo Vectis - Help me on spray details
 

call me back on 9901307428. i will get u details about spray angle

you have to specify the spray notepad file in the spray setup. the direction must be mensioned in the notepad file in terms of X, Y and Z direction. these values must be given as input in the spray setup also...

hi seshram and im there for u dear,
I m trying to simulate the combustion process in indirect injection diesel engine i have done compression successfully and results are matching with theoretical results but while combustion simulation it stops at 346.5 deg and says "P out of the range in PRPTY routine"
P = -33.61; Range 0.0-300
Please help me..........:(
I have conducted the simulation at least 40to 50 times i m getttinng te same error.......
Thanks in advance

Hi seshram and im there for u dear
I m trying to simulate the combustion process in Ricardo Vectis. I could simulate compression process successfully But during combustion at 345.5 deg it says the " P out of the range in prpty routine
P= -33.6; Range: 0.0-300".
Please hep me....i have the conducted the simulation at least 50times....i m getting the same msg...please help me...........:( how to fix this
Thanks in advance........:)