CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Grafic Problem with StarCCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 23, 2007, 17:52
Default Grafic Problem with StarCCM+
  #1
Emiliano Binotti
Guest
 
Posts: n/a
I can't see well the mesh, and when I try to generate a Planar Section (button fx) Star CCM+ crash out!! Could be the grafic chipset Intel 965? Is it a grafic accelerator problem?
  Reply With Quote

Old   October 24, 2007, 16:41
Default Re: Grafic Problem with StarCCM+
  #2
Nari
Guest
 
Posts: n/a
i had same problems too in Linux.. so after that i have done my planar sections by Derived Parts-Plane Sections..

try install again..

  Reply With Quote

Old   October 24, 2007, 23:45
Default Re: Grafic Problem with StarCCM+
  #3
mikec
Guest
 
Posts: n/a
I don't think I fully understand your problem, but some graphic problems I encountered were fixed by loading the program in mesa rendering mode.
  Reply With Quote

Old   October 25, 2007, 16:36
Default Re: Grafic Problem with StarCCM+
  #4
Aeron
Guest
 
Posts: n/a
Could be graphics acceleration or java version. I've seen this issue fixed with both approaches. If in Windows, reduce graphics acceleration one or two notches. If that doesn't work, or if in Linux, be sure the java is the up to date version. Sometimes a new version of the software is installed, but java isn't updated on the computer. They have a new installer wizard now, so that shouldn't be an issue in the futre, but in the past it was. And as the other posters said, might also try reinstalling.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
RNG with StarCCM+ ? GGo CD-adapco 2 October 29, 2008 06:41
problem with export ccm from starccm+ yan CD-adapco 0 July 22, 2008 05:06
Starccm+ Ahmed CD-adapco 5 July 23, 2007 02:21
Running script files without opening grafic inter Jim CFX 0 March 21, 2006 07:57
Blur of grafic display of cavity in paraviev newbee OpenFOAM Paraview & paraFoam 5 January 23, 2006 09:34


All times are GMT -4. The time now is 11:17.