CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

mixing cup temperature using posdat.f

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 19, 2007, 23:30
Default mixing cup temperature using posdat.f
  #1
Thiyagarajan
Guest
 
Posts: n/a
hi everybody,

i want to find the mixing cup temperature (bulk mean temperature) using posdat.f.This i could calculate with 'integrate cset' command.But i need to do this way.It is a simple cylinderical pipe with velocity inlet and outflow boundary conditions.Thanks for your time. regards Thiyaga.
  Reply With Quote

Old   November 28, 2007, 01:00
Default Re: mixing cup temperature using posdat.f
  #2
Zhang Xiaokun
Guest
 
Posts: n/a
I am not very clear about your question.But I have just finished a job like that recently.In my case I wrote a .MAC to get those data.In your case,maybe you can try the .MAC I write for you below. resu,, load,, oper getc t 4 oper getc volu 5 *get vol rtot 5 oper,mult,4,5,6 *get aaa rtot 6 *set Tave aaa / vol *lis Tave close all

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFL in posdat hamodi Siemens 2 August 6, 2007 03:27
POSDAT Sheila Siemens 2 February 8, 2006 12:08
mixing cup temperature using posdat.f Boban Siemens 0 July 8, 2005 11:46
Temperature mixing Kevin Joyce FLUENT 0 July 28, 2004 12:32
ideal gas mixing law and mass-weighted mixing law Shankar FLUENT 0 June 24, 2003 14:25


All times are GMT -4. The time now is 01:47.