CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

volume meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 22, 2008, 04:56
Default volume meshing
  #1
Azraf
Guest
 
Posts: n/a
dear expert out there,

iam a new user of star-cd ~ 2 months. now, i am doing my volume meshing using pro-amm. i am using trimmed mesh meshing type.when i run mesh checking it give me error on "Disconnected cells". i already redraw my geometry, reduced the cell length, uncheck the AFT and grow tetfix. is there any other ways to do this? the geometry is only 12 number of block which size is 30mm x 30mm x 150mm.

need help and please advise.

azraf
  Reply With Quote

Old   May 22, 2008, 15:58
Default Re: volume meshing
  #2
BastiL
Guest
 
Posts: n/a
Where are disconnected cells located? Try to look at the regions and either create couples manually or fix surface.

Regards
  Reply With Quote

Old   July 4, 2008, 04:36
Default Re: volume meshing
  #3
azraf
Guest
 
Posts: n/a
thanks...i now can solve the disconnectd cells.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
meshing a volume vasanth FLUENT 0 January 16, 2008 14:28
Singularity of grid?Volume meshing vs face meshing Ken Main CFD Forum 0 September 4, 2003 11:09
Volume Meshing & Face Meshing? singularity of grid ken FLUENT 0 September 4, 2003 11:08
volume meshing nikita FLUENT 1 July 3, 2003 01:25
volume meshing nikita FLUENT 5 June 30, 2003 05:11


All times are GMT -4. The time now is 17:06.