Convergence problem with compressible flow
 

Hi I am doing cfd analysis of system which contain porous media as well as fluid mixing for temperature reduction. I performed 3000 iterations , did the post processing . but am getting static pressure more than total pressure which is not the correct solution. I did heavy under relaxation but still i am getting same problem. Can anybody help me out in locating the real cause?

Re: Convergence problem with compressible flow
 

Can u brief ur boundary conditions and the inputs u used in porous media?

Re: Convergence problem with compressible flow
 

Hi Phani , I am having one mass inlet and two pressure boundary conditions.