CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Why StarCCM+ from a user's perspective

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 4, 2010, 15:49
Default Why StarCCM+ from a user's perspective
  #1
New Member
 
TJL
Join Date: Jan 2010
Posts: 3
Rep Power: 16
TJLangley is on a distinguished road
I have been investigation various commercial CFD products over the past few weeks. I have been in touch with sales reps and support engineers from CD-A, Fluent, FloEFD, and CFDesign, and I've heard all the spiels.

I need to justify to management the cost of going with Star CCM+ over a much cheaper FloEFD. Does anyone have any insight from an engineer's perspective?

We will mainly be using it for external supersonic and hypersonic flows over aerial vehicles and projectiles. Thank you.
TJLangley is offline   Reply With Quote

Old   January 5, 2010, 14:16
Default
  #2
f-w
Senior Member
 
Join Date: Apr 2009
Posts: 153
Rep Power: 16
f-w is on a distinguished road
I was in a similar position two years ago. My company mainly does external aero over complete aircraft in subsonic-transonic regime.

In our case, we were moving from outsourcing our work to in-house. So, ease of use, automation, mesh generation (especially with poor geometry), and local support were important factors. Somewhere along the line, you have to weigh how much you'll be saving in the long run by going with less expensive solutions.

To get a better feeling of the software, we supplied typical geometry to some of the vendors, and had them go through the simulation pipeline, and present something to us. If you have the time, it might also be a good idea to try it out yourself with a trial version.

By the way, I noticed you didn't have any free NASA codes or CFD++ in your list ...
f-w is offline   Reply With Quote

Old   January 5, 2010, 22:06
Default
  #3
New Member
 
TJL
Join Date: Jan 2010
Posts: 3
Rep Power: 16
TJLangley is on a distinguished road
I'm currently working on obtaining evaluation copies of the software. Other than comparing forces and moments, I'm glad you pointed out evaluating meshing poor geometry. I have used EFDLab (predecessor to FloEFD) and it was quite a chore getting geometry to work.

I've spoken with a few colleagues about CFD++, and while it looks valuable, I'm afraid it would require a dedicate CFD expert. We currently don't have someone like this and probably wouldn't go out of our way to acquire one.

What can you tell me about free NASA codes? I have heard them mentioned, but I don't know much about them. Feel free to PM as I realize they require DoD authorization. Thanks for the feedback.
TJLangley is offline   Reply With Quote

Old   January 6, 2010, 12:53
Default
  #4
f-w
Senior Member
 
Join Date: Apr 2009
Posts: 153
Rep Power: 16
f-w is on a distinguished road
Yeah, geometry handling was important to us in the early phase since our legacy geometry was not perfect (had holes, wasn't watertight, composed of multiple disjointed pieces).

Our company did not have a CFD engineer as well. We purchased basic training from cd-adapco, and all support thereafter was free of charge.

Can't tell you much about the NASA code since I didn't use it. But from what I gather, out of all codes I considered it had the steepest learning curve, and all tools were separate. Here's the site:
http://www.grc.nasa.gov/WWW/wind/
f-w is offline   Reply With Quote

Old   January 7, 2010, 08:17
Default
  #5
Senior Member
 
Join Date: Mar 2009
Posts: 260
Rep Power: 18
Maddin is on a distinguished road
I have heard that some firms uses OpenFoam to save costs.
First time you have more costs because the guys have to understand the system. But you can use unlimited cpu's. Sometimes more important
Maddin is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] Problems with starccm mesh AndTen OpenFOAM Meshing & Mesh Conversion 1 February 23, 2010 05:43
New dedicated forum for EFD and FloWorks users Forum Administrator Main CFD Forum 6 April 15, 2008 12:56
500 registered CFD-Wiki users Jonas Larsson CFD-Wiki 4 December 9, 2005 12:02
Fluent 5.5. What the differences with fluent 5.3?? confused FLUENT 2 July 29, 2001 22:58
2000 North American STAR-CD Users Conference Andrew Robertson Siemens 0 March 31, 2000 19:18


All times are GMT -4. The time now is 05:48.