|November 3, 2010, 15:21||
Help on 2D interpolation in StarCCM+
Join Date: Nov 2010
Posts: 2Rep Power: 0
Iam trying to perform interpolation on 2D data in StarCCM+.
I have used with great success the "InterpolateTable" routine supplied with the software. Essentially it does 1D interpolation of a variable in column2 with respect to variable in column1 of a table.
Iam interested in 2D interpolation where a variable is a function of say Temperature and Pressure. In this case, we would have a 2D table for each variable (say Density). A sample table at few temperatures and pressures is shown below with the real table to be a very large 2D matrix.
T1 T2 T3
P1 0.3 0.4 0.48
P2 0.5 0.53 0.57
P3 0.7 0.87 0.9
Eventually, I need to evaluate Density at any given Temperature and Pressure using interpolation. For simplicity, LINEAR interpolation is sufficient.
I need some suggestions on how to handle such a requirement in StarCCM+. I would really appreciate your help in this regard.
If someone has a work around for this problem, please let me know. Iam not sure if we can write a "user code" for this problem. I have no experience with "user code", but if it solves my problem, I can start working.
Any support from the experience guys will be greatly appreciated.
|Thread||Thread Starter||Forum||Replies||Last Post|
|urgent help needed (rhie-chow interpolation problem)||Ardalan||Main CFD Forum||2||March 18, 2011 16:22|
|Surface interpolation schemes and parallelization||jutta||OpenFOAM Running, Solving & CFD||0||February 25, 2010 15:32|
|Problems with starccm mesh||AndTen||OpenFOAM Meshing & Mesh Conversion||1||February 23, 2010 05:43|
|momentum interpolation for collocated grid||Hadian||Main CFD Forum||4||December 25, 2009 08:25|
|2nd order interpolation for NS solver||Quarkz||Main CFD Forum||6||July 15, 2005 21:50|