Need some assistance in modelling
Project details below
To study and compare the spray length, cone angle of the spray and droplet size inside the cylinder of petrodiesel and biodiesel. . 3 orifices at 120° each . At the end of compression, Air pressure = 30-40 bar at 250° C Fuel pressure = 250 bar Arrangement : A cylinder arrangement of a diesel engine with the two valves in the closed position. An injector is placed in the middle vertically, the nozzle tip has 3 orifices placed at 120° each. Orifice dia being 0.6mm. All the dimensions of the cylinder arrangement to be taken according to any specific standard. |
Dear if you need simulations using Ansys CFX. I can help you. you can contact me with details.
|
Hello Naresh,
Hi-Tech Engineering will be happy to assist you in your project. Please visit : Hi-Tech: Engineering Services - CAE, FEA, CFD : http://bit.ly/Hi-Tech-CAE-FEA-CFD-Services To view our services and case studies. Our services are cost effective and we will be happy to get associated with your organization. Looking forward to hear from you. Regards Hemen Shah. www.hitechos.com hemen.shah@hitechos.com. |
All times are GMT -4. The time now is 19:48. |