 |
 |
 |
|
|
|
[Sponsors] | ||||
Problem in mesh interface when initializing the solution |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 6, 2017, 11:55
|
Problem in mesh interface when initializing the solution
|
#1 |
|
New Member
Mehedi Hasan Polash
Join Date: Mar 2017
Posts: 1
Rep Power: 0  |
A have a problem with mesh iterface region .When running the solution at first it continues to converge suddenly it turns 180 degree opposite and starts to diverge . I got an warning when initializing the solution. Can you help me to fix it ?
|
|
|
|
|
|
May 10, 2017, 02:34
|
ICEM Mesh expert
|
#2 |
|
Member
sila
Join Date: Jul 2013
Posts: 32
Rep Power: 10 |
Still you are facing the problem? How can i help you?
|
|
|
|
|
|
|
June 1, 2017, 09:31
|
|
#3 |
|
Senior Member
Kal-El
Join Date: Apr 2017
Location: Finland
Posts: 150
Rep Power: 7 |
Could be a problem with mesh/geometry. Are you sure that those walls are not overlaping like the fluent tells you?
|
|
|
|
|
|
|
| Tags |
| diverge, mesh inter |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem with porous flow at multi-material interface with large permeability diff. | Hisham | OpenFOAM Programming & Development | 1 | June 3, 2016 10:51 |
| [snappyHexMesh] SHM problem : KVLCC2 with appendage mesh | sc.park | OpenFOAM Meshing & Mesh Conversion | 1 | March 13, 2016 13:28 |
| Radiation interface | hinca | CFX | 15 | January 26, 2014 17:11 |
| Frozen Rotor 1:1 Mesh Connection | pharley | CFX | 5 | January 31, 2013 16:15 |
| Replace periodic by inlet-outlet pair | lego | CFX | 3 | November 5, 2002 20:09 |
Linear Mode
