CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFD Online Community > CFD-Wiki

How to define a hole as boundary condition in Ansys Fluent using Fluent an mesh only?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 12, 2019, 05:03
Exclamation How to define a hole as boundary condition in Ansys Fluent using Fluent an mesh only?
  #1
New Member
 
Nagu Sattenapalli
Join Date: Aug 2019
Posts: 1
Rep Power: 0
Nagu Sattenapalli is on a distinguished road
Hello all,
I am working on a project "simulation of cold storage" using Ansys Mesh and Fluent.The definition of problem just like AC circulating air inside a room. For that i have to generate two hollow cuboids placed one cuboid internal and the other external. Generated holes on internal cuboid for giving the boundary conditions(inlet and outlet). I generated surfaces on holes for giving boundary conditions. Then the surface and fluid mediums are meshed in Fluent mesh. The Fluent Mesh showing the inlet and outlet surfaces. But while giving this to Fluent Solver, the Fluent Solver is not identifying the inlet and outlet boundaries. Can anyone give the suggestions weather it can be solvable or not in Ansys Fluent. I even changed the surfaces in to solid but still not identifying. (we created the mesh in ICEM CFD and defined the boundaries, then the solver identified and the solution converged. My question - "Is it possible in Ansys CFD Mesh & Fluent?)".
Nagu Sattenapalli is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem in setting Boundary Condition Madhatter92 CFX 12 January 12, 2016 05:39
The fluent stopped and errors with "Emergency: received SIGHUP signal" yuyuxuan FLUENT 0 December 3, 2013 23:56
[Commercial meshers] icem fluent mesh with cyclic boundary condition jiejie OpenFOAM Meshing & Mesh Conversion 1 April 5, 2011 04:36
few quesions on ANSYS ICEMCFD and FLUENT Prakash.Paudel ANSYS 0 August 12, 2010 13:07
Free surface boudary conditions with SOLA-VOF Fan Main CFD Forum 10 September 9, 2006 13:24


All times are GMT -4. The time now is 05:53.