Multizone mesh in CFX
 

Hi All

Im using multizone mesh in a rectangular box(450mm*900mm*225mm). Does multizone calculate half elements? when I use element size of 0.008m I should get 56.25 elements in x direction but I have 57 and in z direction I should have 28.125 elements but I have 29 elements!
This issue cused problem in my results.Because I have a slot at the top of my box that made by imprint faces.I noticed this slot is moving a bit about 2mm from the centre of the box in post-cfx.:confused:

Regards,
Sepi