[songxguan]

Hello everybody,

This is my first time to post after CFD online changed the theme. It looks very nice.

I have a problem to solve, wish somebody can help me.

I run a transient model, and after a little long time (40 hours), i used the "stop" button to stop it, (since i thought the time is enough), unfortunately, it can not produce the .res result file.

************************************************** ***
a stop request has already been sent to the ANSYS CFX Solver process running in the specified directory: G:\aaa\aaa.dir
************************************************** ***

Is there someone know why this happend? and how to fix it.

Thanks in advance.

[cfdguy]

It looks like something else happened. The cfx5stop command is fine. Was it any CPU still working or was it just freezed?

Cheers!

[jehan]

Hi,
I have the same problem, except that I ran a steadystate run ( in HP MPI local parallel , 2 cores) through the console mode.

I used the cfx5stop command to stop the run, which was quiet efficient as it killed the job in the middle of a loop iteration....

And no result file has been created, could someone help please?

[ghorrocks]

cfx5stop should exit gracefully and give a results file. Are you sure nothing else is wrong, such as disk space or network error?

[jehan]

I tried with other input files (such as those created to follow the tutorials given by ansys) and there is no problem : the folder.dir is transformed into a result file just after the process is interrupted : /
It looks like the problem is linked with the current run. For instance I haven't spotted network problem and I have enough room on the hard drive.

I have contacted ANSYS support, if they solve the problem I'll post the solution.

[Saima]

I got error in runing def file in batch mode.
I am using command:
C:\Users\sanaz\Desktop>"C:\Program Files\ANSYS Inc\v121\CFX\bin\cfx5solve" -def Rotor_67.def

It produce my result file but it also give the messgae:

"Feature CFX_SOLVER_BASIC_MP_LIMIT does not exist in the ANSYSLI pool."

Acutally i mam using batch mode in iSIGHT optimization software this software stop after getting this messgae it takes as an error.

[mohammad]

Originally Posted by jehan

I tried with other input files (such as those created to follow the tutorials given by ansys) and there is no problem : the folder.dir is transformed into a result file just after the process is interrupted : /
It looks like the problem is linked with the current run. For instance I haven't spotted network problem and I have enough room on the hard drive.

I have contacted ANSYS support, if they solve the problem I'll post the solution.

Hi jeha,Hi everbody...
I have the same problem..I enter the command line "cfx5stop -<folder>.dir"
it does not work...the run continues ...do you know how to solve it?

regards

[c120613]

Hi Guys,

I'm using CFX14.0 and in my case worked by writing in the command line the following:

cfx5post -directory <directory_name>.dir

I hope it will work for you too

Cheers

Domy