CFD Online Discussion Forums - How to create a mesh use ICEM in CFX?

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- CFX (https://www.cfd-online.com/Forums/cfx/)

- - How to create a mesh use ICEM in CFX? (https://www.cfd-online.com/Forums/cfx/104773-how-create-mesh-use-icem-cfx.html)

How to create a mesh use ICEM in CFX?

Hello everyone:
I want to create meshs for 4parts in a asm in CFX-mech.I have setted up the ICEM relevane in CFX for 4 parts in 4 multizone mesh methods.When I click "generate mesh" button,the program can inter ICEM environment, when I complete the mesh in ICEM,and back to CFX-mesh,but the mesh can not be generated sucessfully.Hint:The problem geometry areas might have been highlighted. and error:The fllowing entities with objects scoped to them were unable to have mesh data correctly associated with them .Try removing the object scoped to these entities or try another mesh method to get a successful mesh.But I can not see the highlighted geometry.I don't know why.
Thanks and best regards.
Sheng.

Quote:

Originally Posted by little stone (Post 371558)

Hi Sheng, can you put the photo of full model, cut view, and critical area surfaces. from that only i can to explain your doubt for meshing

Hello manigadan:
Thank you for your anwser!I don't know whether you can know me with my poor English.I will try my best to express my doubt for you.
I have added some photos to the top.
Thanks a lot .
Sheng.

These are pretty standard errors to get while you develop a meshing strategy for a new body. I recommend you do the meshing tutorials which come with ICEM/workbench, and look at the additional ones provided on the ANSYS customer portal.