CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > CFX

Fan simulation divergence

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 23, 2012, 22:30
Post Fan simulation divergence
New Member
Ayothi Ramanathan
Join Date: Sep 2011
Posts: 28
Rep Power: 8
ayothicfd is on a distinguished road
Hi everyone,
I am doing FD fan in ansys. I have noticed divergence problem while doing the mass flowrate of 53.54 kg/s and above with IGV 30 deg inclination. I have taken a backup file of the same run while getting diverged in which I have gained some idea that the pressure value at stator-rotor interface is getting too large (around 2 lakh pascal). So that, I have given the interface option as frozen rotor instead stage. And, It is getting converged for the above specified mass flow. I checked the same simulation by changing the interface option as stage through the converged result as initial file. It is also getting diverged and stopped. Is there any problem while doing interface option as stage? or do I have to look any important things before using stage interface?
ayothicfd is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Simulation of Axial Fan Flow using A Momentum Source Subdomain Liam CFX 28 July 16, 2013 08:24
Divergence detected in Valve simulation mehn STAR-CCM+ 5 July 23, 2009 08:38
Flow Simulation Outlet Fan D.Castle FloEFD, FloWorks & FloTHERM 0 June 30, 2009 15:00
simulation of a fan...plz help pankaj chaddah FLUENT 4 July 13, 2006 12:34
Question concerning about the flow simulation of a fan in an engine room. ghlee Main CFD Forum 3 October 21, 1998 07:05

All times are GMT -4. The time now is 22:52.