CFD Online Discussion Forums

CFD Online Discussion Forums (
-   CFX (
-   -   CFX result file to Tecplot (

csmistry July 24, 2012 07:43

CFX result file to Tecplot
Dear friends,

I was using CFX post processor for my results of CFD analysis but for near wall region in turbo machines i would like to plot 1-D,2-D velocity plot. which i found not possible with CFX Post processor.I heard it is possible with Tecplot. but i have no idea how to use Tecplot for cfx results. i made cgns file too. still i face problem. can you suggest something?

ghorrocks July 24, 2012 19:41

What aer you trying to do? CFD-Post is a powerful post processor and there is not much it cannot do.

csmistry July 28, 2012 06:33

I would like to capture flow physics in tip region (Between casing and rotor) in terms of velocity vector along the camber .
I am sure you will surely suggest some idea!!

ghorrocks July 28, 2012 07:50

CFD-Post has many tools and should be able to do what you describe. Can you describe exactly what you intend to do? An image would help.

csmistry July 29, 2012 05:48

1 Attachment(s)
Please look at the plots and kindly suggest me how to plot it.

ghorrocks July 29, 2012 07:29

Doesn't these plots already show the velocity vectors in the tip region? What further views do you want to see?

csmistry August 8, 2012 09:59

Sir, this plots are by StarCD software. I want to have it in CFX Turbo...!!!

adenlan August 10, 2012 08:17

Tecplot 360 2012 supports Ansys CFX. If you're lucky enough to have this last version you should import your results without problems. However, if you have an older version, you should export your results in Ensight format (I think...)

All times are GMT -4. The time now is 11:51.