Problem with CFX-SOLVER MANAGER

mariam.sara · September 12, 2012, 09:51

Hello I am unable to run my .def file in cfx-solver manager when I click start run the following message appear to me:

feature cfx-solver-physics-module does not exit in the ANSYSLI pool

what the problem?

ghorrocks · September 12, 2012, 18:52

It cannot find a license to run it. Check the license server is up and that your license has not expired.

mariam.sara · September 13, 2012, 01:15

I do not think there is problem with my license it all running i check it from SERVER_ANSLIC_ADMIN UTILITY furthermore i run a tutorial from help its about "Buoyant Flow in a Partitioned Cavity" it work fine and I saw the results with post cfx but I think there is problem with my case settings I depend on a paper its uses ANSYS CFX too I follows its steps of modeling but I do not really know what happen and this error now appear to me : run terminated with errors No result file created?

I can post the paper and my CCL file if you want have a look?

ghorrocks · September 13, 2012, 07:06

Do you have a basic CFX license? This only allows the simple physics to be used. If you are asking for physics which requires an optional physics license (eg moving mesh, advanced turbulence, chemistry etc) and it cannot find one it will bomb out, yet run the simple tutorial problems fine.

mariam.sara · September 13, 2012, 07:11

But as i know if the license stopped the program cannot be run anymore? The license manager is working?

September 12, 2012, 09:51	Problem with CFX-SOLVER MANAGER	#1
mariam.sara Senior Member Join Date: Jan 2011 Posts: 339 Rep Power: 17	Hello I am unable to run my .def file in cfx-solver manager when I click start run the following message appear to me: feature cfx-solver-physics-module does not exit in the ANSYSLI pool what the problem?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFX 11 Solver problem	dak56	CFX	3	December 11, 2008 19:20
CFX Solver Memory Error	mike	CFX	1	March 19, 2008 07:22
Fan Modelling Problem in CFX	Jenny	CFX	8	September 11, 2007 13:59
Problem on mesh import to Ansys CFX 10.0	Stephen Lau	CFX	1	April 18, 2007 03:02
CFX 5.6 memory problem with solver	sreevisakh	CFX	3	February 2, 2004 04:57

September 12, 2012, 18:52		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,934 Rep Power: 145	It cannot find a license to run it. Check the license server is up and that your license has not expired.

September 13, 2012, 01:15		#3
mariam.sara Senior Member Join Date: Jan 2011 Posts: 339 Rep Power: 17	I do not think there is problem with my license it all running i check it from SERVER_ANSLIC_ADMIN UTILITY furthermore i run a tutorial from help its about "Buoyant Flow in a Partitioned Cavity" it work fine and I saw the results with post cfx but I think there is problem with my case settings I depend on a paper its uses ANSYS CFX too I follows its steps of modeling but I do not really know what happen and this error now appear to me : run terminated with errors No result file created? I can post the paper and my CCL file if you want have a look?

September 13, 2012, 07:06		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,934 Rep Power: 145	Do you have a basic CFX license? This only allows the simple physics to be used. If you are asking for physics which requires an optional physics license (eg moving mesh, advanced turbulence, chemistry etc) and it cannot find one it will bomb out, yet run the simple tutorial problems fine.

September 13, 2012, 07:11		#5
mariam.sara Senior Member Join Date: Jan 2011 Posts: 339 Rep Power: 17	But as i know if the license stopped the program cannot be run anymore? The license manager is working?