analysis of hvac of a ship cabin in cfx

uetian · September 13, 2012, 01:25

hi ,, i need help regrading my thesis , i have calculated cooling/heating load of ship cabin and have found required air flow rate ,, and now i want to find temperature distribution and air flow patterns in Ansys cfx for that cabin,, as i am new to this software and problem , please recommend me how should i proceed , my target is to validate my air flow calculations that these are correct and can well air conditioned my subject cabin ,, best regards

Lance · September 13, 2012, 03:20

So your question is about how to use the software? I take it you have done all the relevant tutorials, especially the ones about cfd-post?

uetian · September 13, 2012, 05:50

Quote:

Originally Posted by Lance

So your question is about how to use the software? I take it you have done all the relevant tutorials, especially the ones about cfd-post?

thanks for quick reply ,, i have read few tutorials ,, and have rough sketch of what i gonna do ,, my subject cabin is 20ft(length) x 14ft(width) X10ft(height), my apprehension is that i could solve this on a normal fast personal computer or not , and how complex problem it would be ,, i mean how much time it would take to learn the software and execute the problem ,,, as i have to plan for my thesis ,, reagrds

Lance · September 13, 2012, 05:55

It would take exactly 49 hours and 3 minutes to solve your problem.

No, seriously, it is impossible for any of us to say how long it will take for you to solve your problem. It depends on your background, if you are a fast learner, the amount of details in your geometry, the complexity of the physics, mesh size, amount of post-processing, etc etc....

September 13, 2012, 01:25	analysis of hvac of a ship cabin in cfx	#1
uetian New Member awan Join Date: Sep 2012 Posts: 2 Rep Power: 0	hi ,, i need help regrading my thesis , i have calculated cooling/heating load of ship cabin and have found required air flow rate ,, and now i want to find temperature distribution and air flow patterns in Ansys cfx for that cabin,, as i am new to this software and problem , please recommend me how should i proceed , my target is to validate my air flow calculations that these are correct and can well air conditioned my subject cabin ,, best regards

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steady level flight airfoil analysis using ANSYS CFX v12	flutter	CFX	21	March 29, 2016 03:51
ship propeller thrust performance analysis	burak samsul	FloEFD, FloWorks & FloTHERM	6	December 4, 2013 06:18
Pros and Cons for CFX, CFdesign, COMSOL	Val	Main CFD Forum	3	June 10, 2011 02:20
cfx for HVAC applications?	Thomas	CFX	0	August 11, 2000 04:29
Simulating flow past a ship using CFX	Dr. Tanmay Sarkar	CFX	0	February 4, 2000 06:38

September 13, 2012, 03:20		#2
Lance Senior Member Lance Join Date: Mar 2009 Posts: 669 Rep Power: 23	So your question is about how to use the software? I take it you have done all the relevant tutorials, especially the ones about cfd-post?

September 13, 2012, 05:55		#4
Lance Senior Member Lance Join Date: Mar 2009 Posts: 669 Rep Power: 23	It would take exactly 49 hours and 3 minutes to solve your problem. No, seriously, it is impossible for any of us to say how long it will take for you to solve your problem. It depends on your background, if you are a fast learner, the amount of details in your geometry, the complexity of the physics, mesh size, amount of post-processing, etc etc....