CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   Tutorial input files (https://www.cfd-online.com/Forums/cfx/109081-tutorial-input-files.html)

Niru November 8, 2012 16:20

Tutorial input files
 
Hi

I would like to have the tutorial input files of following CFX tutorials.

1. Free surface flows over a bump
2. Gas -liquid flow in a airlife reactor
3. Multiphase flow in a mixing vessel
4. Oscillating plate with 2 way fluid structure interaction
5. Time Transformation method for a inlet disturbance case

If anybody has the input files (e.g. mesh files) please upload it ..
or you can mail me.

Thanks for your help.:)

cdegroot November 8, 2012 16:59

You should have the tutorial files if you have CFX installed.

Check C:\Program Files\ANSYS Inc\v145\CFX\examples

Will vary if you are not running 14.5.

Niru November 8, 2012 17:16

thanks a lot. It was there

evcelica November 12, 2012 20:00

Quote:

Originally Posted by cdegroot (Post 391099)
You should have the tutorial files if you have CFX installed.

Check C:\Program Files\ANSYS Inc\v145\CFX\examples

Will vary if you are not running 14.5.


I didn't even know 14.5 was out already. I'll have to check what updates there are from 14.0. I remember reading something about parallel meshing, but that may have been 15.

cdegroot November 13, 2012 11:33

14.5 was actually just released today (http://anss.client.shareholder.com/r...leaseID=720797). I didn't realize that it wasn't out yet when I posted, as I was fortunate enough to get a bit of a sneak preview a few weeks ago.

saeedjavani March 22, 2016 15:55

thanks a lot. I was looking for these files and I found them at the folder you said.

anand32 December 20, 2016 00:31

Quote:

Originally Posted by cdegroot (Post 391099)
You should have the tutorial files if you have CFX installed.

Check C:\Program Files\ANSYS Inc\v145\CFX\examples

Will vary if you are not running 14.5.

What about the input files to ICEM CFD? Could you help us to locate the input files (geometry) to them as well?

Antanas December 20, 2016 01:31

Quote:

Originally Posted by anand32 (Post 630504)
What about the input files to ICEM CFD? Could you help us to locate the input files (geometry) to them as well?

Ansys Customer's Portal or Torrents.

ghorrocks December 20, 2016 01:33

The tutorial files are no longer included in the installation. They are now on the ANSYS customer website (https://support.ansys.com/portal/sit...CustomerPortal). I just checked and there is 60 ICEM tutorials available so you have lots to play with.

Chopogh December 23, 2016 03:52

Hi
I'm looking for input file of "Flow Inside a Rotating Cavity"
"VMFL008B_rot_cyl.def for ANSYS CFX" or "rotcv_RRF.cas for ANSYS Fluent"
but I did not find it in ANSYS EXAMPLE FOLDERs
Has any one these files or know how can I find them?
thanks

Chopogh December 23, 2016 03:56

or email to chopogh.chagh@yahoo.com

THANKS

Antanas December 23, 2016 04:25

ANSYS 17 products Tutorial Files

Chopogh December 23, 2016 08:23

Hi
Thanks for your attention Antanas.
but how one can open this file
with notepad? or MS_WORD? or some thing else?

Antanas December 23, 2016 09:54

Quote:

Originally Posted by Chopogh (Post 631064)
Hi
Thanks for your attention Antanas.
but how one can open this file
with notepad? or MS_WORD? or some thing else?

Did you read my post? It's said: This is torrent file. Remove txt extension.

mskmanj April 5, 2017 23:19

Tutorial input files
 
i need the introduction_R150.zip file of fluid flow and heat transfer in a mixing elbow for fluent. So please email me at mskmanj@gmail.com

ghorrocks April 6, 2017 02:08

For older versions of CFX the tutorial files are provided with the installation. If you do not have them then re-install and put them on.

For recent versions of CFX (V17 or V18 I think) the tutorials are available on the ANSYS Customer webpage.

There is no need to email files to anybody, the files are easily available to any legitimate user of CFX.


All times are GMT -4. The time now is 06:10.