ICEM CFD Replay Remeshing
 

Hi.

I´m trying to simulate opening of the sluice in the navigation lock - two phase transient simulation (free surface) with mesh deformation. To keep mesh in reasonable quality I use ICEM CFD Replay Remeshing. I checked configuration with Re-Meshing Tutorial ( http://www.edr.no/blogg/ansys_blogge...cfx_re_meshing ) and it´s ok (at least it seems similar).

First remeshing goes without problems and solver continues. But after second remeshing (with the same configuration and interrupt condition) it produce this error.


"Remesh Object: Remesh 1
Activated by condition: Interrupt Condition 1

Executing remesh command:
C:\Program Files\ANSYS
Inc\v130\icemcfd\win64_amd\bin\icemcfd.bat -batch -script
C:\Program Files\ANSYS
Inc\v140\CFX\etc\Remeshing\icemcfd_Remesh.rpl

CFX Solver Results generated before remeshing have been written to:
D:/Ansys_pracovni/Skarupova/_DP/celkovy_vypocet/rychle_plnen_p-
ending_tasks/dp0_CFX_Solution/1_002\7_oldmesh.res

Text output generated during remeshing has been written to:
D:/Ansys_pracovni/Skarupova/_DP/celkovy_vypocet/rychle_plnen_p-
ending_tasks/dp0_CFX_Solution/1_002\7_remesh.out



+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| ANSYS CFX Solver Input File does not exist |
+--------------------------------------------------------------------+"

I can´t figure out where is the problem. Why the same configuration works for the first remeshing but not for the second one. Did anyone solved this problem?

Thank you for all tips
Have a nice day
Eva

Have you tried to decrease a step size ? I remember that I've got similar problem.