Batch for mesh geometry

hasbi · February 12, 2013, 02:58

I want to create a batch file for mesh my geometry, I read the documentation but I cant create it.

I did it for solving by this procedures:
1) Define the shape in Workbench
2)Clic solve to create *.def file
3)create batch file by below commands:
a-cd C:\your_directory_path
b-"C:\Program Files\Ansys Inc\V121\CFX\bin\cfx5solve" -batch -def Fluid_Flow.def

Please tell me what's difference between solve procedure and mesh procedure? and have to create batch file for mesh my geometries!

Best Regards

hasbi · February 13, 2013, 11:47

Whats your Offer about top post? I do it by ICEM or CFX mesh and what's it command and procedure?

Thanks every one

ghorrocks · February 13, 2013, 17:10

If you are meshing through Workbench you will find it is not designed to be run in a batch file. It has its own parametric design structures instead.

But if you are using meshing software like ICEM it might have a command line option. I don't know, try the meshing and geometry forum.

hasbi · February 19, 2013, 13:04

Is there anyone that tell me the procedures for create batch file ICEM (or TGRID)?
!!!
ـــــــــــــــــــــــــــــــــــــــــــــ ـــ
Thanks

ghorrocks · February 19, 2013, 16:56

Have you looked in the documentation? Or the tutorials on www.ansys.com customer page?

February 12, 2013, 02:58	Batch for mesh geometry	#1
hasbi New Member Asak Join Date: Jan 2013 Posts: 22 Rep Power: 13	I want to create a batch file for mesh my geometry, I read the documentation but I cant create it. I did it for solving by this procedures: 1) Define the shape in Workbench 2)Clic solve to create *.def file 3)create batch file by below commands: a-cd C:\your_directory_path b-"C:\Program Files\Ansys Inc\V121\CFX\bin\cfx5solve" -batch -def Fluid_Flow.def Please tell me what's difference between solve procedure and mesh procedure? and have to create batch file for mesh my geometries! Best Regards

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about Geometry vs. Meshes	EphemeralMemory	ANSYS Meshing & Geometry	2	December 8, 2016 13:02
[ANSYS Meshing] need to convert a cell based geometry into STL or CGNS	kamran_kibria	ANSYS Meshing & Geometry	0	September 15, 2011 05:14
Reg difficulties in meshing the geometry...Urgent	arunraj	ANSYS Meshing & Geometry	0	August 26, 2011 23:25
[snappyHexMesh] SnappyHexMesh meshes inside and outside of an STL geometry	villier	OpenFOAM Meshing & Mesh Conversion	17	June 15, 2010 19:51
[GAMBIT] import terrain geometry	cfdworker	ANSYS Meshing & Geometry	2	May 24, 2009 21:40

February 13, 2013, 11:47		#2
hasbi New Member Asak Join Date: Jan 2013 Posts: 22 Rep Power: 13	Whats your Offer about top post? I do it by ICEM or CFX mesh and what's it command and procedure? Thanks every one

February 13, 2013, 17:10		#3
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,830 Rep Power: 144	If you are meshing through Workbench you will find it is not designed to be run in a batch file. It has its own parametric design structures instead. But if you are using meshing software like ICEM it might have a command line option. I don't know, try the meshing and geometry forum.

February 19, 2013, 13:04		#4
hasbi New Member Asak Join Date: Jan 2013 Posts: 22 Rep Power: 13	Is there anyone that tell me the procedures for create batch file ICEM (or TGRID)? !!! ـــــــــــــــــــــــــــــــــــــــــــــ ـــ Thanks

February 19, 2013, 16:56		#5
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,830 Rep Power: 144	Have you looked in the documentation? Or the tutorials on www.ansys.com customer page?