CFD Online Discussion Forums

CFD Online Discussion Forums (
-   CFX (
-   -   advise needed - nozzle problem (

Sally April 5, 2013 13:22

advise needed - nozzle problem

ghorrocks April 6, 2013 05:21

Please post an image of what you are modelling, the water column which is the wrong shape and what shape you expect it to be. Also include an image of your mesh.

Sally April 8, 2013 11:37


ghorrocks April 8, 2013 18:27

In my experience on this forum when people post an image of what they are seeing then 95% of the time the issue becomes apparent and it is not related to what the original post writer thought was important.

So if you cannot post an image I do not think we are going to get very far.

If the image is confidential then post an image which does not show the confidential bits. Or develop a non-confidential simulation which shows the same behaviour but can be shown publically.

Sally April 11, 2013 13:24

Thank you very much for replying and trying to help me out. Just wanted to let you know that I solved the problem.

Lance April 12, 2013 02:24

The whole point of this forum is that it can be used to help people with their CFX problems. You are not really helpful by deleting your posts and say "I solved the problem"

relevant xkcd:

All times are GMT -4. The time now is 20:40.