CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   mixing index in cfx (https://www.cfd-online.com/Forums/cfx/116338-mixing-index-cfx.html)

 rasool motamedi April 17, 2013 06:42

mixing index in cfx

hello
i want calculate the mixing index of an active micro mixer with oscillating stirrer.
i simulate this but for validat of my problem I need to calculat these
D={(1/N)Σ[(Ci-Cmean)/Cmean]^2}^0.5
In this equation, N is the number of discretized points on the cross
line for the channel, Cmean is the mean concentration at the inlet, and
Ci is the local concentration at each cross section.

 ghorrocks April 17, 2013 08:06

Sounds like a reasonably simple post processing operation. Set up your cross sections as planes or whatever they are, then write a CEL expression like (1/N)*[(massFlowAve(c)@Section 1-Cmean)/Cmean + (massFlowAve(c)@Section 2 -Cmean)/Cmean + .... + (massFlowAve(c)@Section N-Cmean)/Cmean].. etc....

 rasool motamedi April 19, 2013 03:28

Hello my dear
ghorrocks
(ave{[(A1 Volume fraction - Cmean)/Cmean]^2}@outlet)0.5

 ghorrocks April 19, 2013 06:12

The AreaAve function is better than Ave as it is the area weighted average.

 All times are GMT -4. The time now is 14:04.