monte carlo radiation model

sunilpatil · April 24, 2013, 23:07

Hello sir,
In conjugate heat transfer problem i am using monte carlo (MC) radiation model.

For solid (Brick wall) domain i have selected
Thermal radiation -monte carlo
number of histories - 10000
Transfer mode - surface to surface
spectral model - Gray
Scattering model - none

For fluid(AIR) domain not selected any radiation model because air is transparent
to radiation.is this approach correct or i have to select radiation model for air domain also.and sir in CFX is it radiation depends on number of elements.
Thank you sir,
Sunil patil

ghorrocks · April 25, 2013, 07:16

If the rays go through the domain then the domain need a radiation model to calculate the rays - even if they just go straight through.

Also - would this model work with the Discrete Transfer model? It is MUCH faster and easier to use, if it is appropriate.

evcelica · April 25, 2013, 08:59

Like Glenn said, The discrete transfer model sound like it would be more appropriate since the fluid medium is not involved here.

Oula · February 21, 2019, 07:04

In fluent you can remove the tick mark from the options of "participates In Radiation" in the Cell Zone Conditions panel. This means that this particular fluid/solid zone is not participating in the radiation

April 24, 2013, 23:07	monte carlo radiation model	#1
sunilpatil Senior Member sunil Join Date: Jul 2012 Location: Bangalore Posts: 181 Rep Power: 14	Hello sir, In conjugate heat transfer problem i am using monte carlo (MC) radiation model. For solid (Brick wall) domain i have selected Thermal radiation -monte carlo number of histories - 10000 Transfer mode - surface to surface spectral model - Gray Scattering model - none For fluid(AIR) domain not selected any radiation model because air is transparent to radiation.is this approach correct or i have to select radiation model for air domain also.and sir in CFX is it radiation depends on number of elements. Thank you sir, Sunil patil

April 25, 2013, 08:59		#3
evcelica Senior Member Erik Join Date: Feb 2011 Location: Earth (Land portion) Posts: 1,193 Rep Power: 24	Like Glenn said, The discrete transfer model sound like it would be more appropriate since the fluid medium is not involved here. Oula likes this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Solar radiation model	Min	Siemens	2	August 31, 2018 08:04
How model radiation of both solid wall and fluid£¿	Harry Qiu	FLUENT	2	February 3, 2013 23:04
Meshing for Monte Carlo Radiation	Zoran	CFX	6	November 30, 2007 10:03
Radiation Model - Spectral Model	Ray	CFX	3	April 10, 2006 09:33
Monte Carlo vs Discrete Transfer	TobiasZ	CFX	5	January 25, 2006 11:11

April 25, 2013, 07:16		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,934 Rep Power: 145	If the rays go through the domain then the domain need a radiation model to calculate the rays - even if they just go straight through. Also - would this model work with the Discrete Transfer model? It is MUCH faster and easier to use, if it is appropriate.

February 21, 2019, 07:04		#4
Oula Member Oula Join Date: Apr 2015 Location: United Kingdom Posts: 81 Rep Power: 11	In fluent you can remove the tick mark from the options of "participates In Radiation" in the Cell Zone Conditions panel. This means that this particular fluid/solid zone is not participating in the radiation