|
[Sponsors] |
April 25, 2013, 21:09 |
Question about permeability setting
|
#1 |
Senior Member
Meimei Wang
Join Date: Jul 2012
Posts: 494
Rep Power: 15 |
Hi,
We could set up streamwise permeability and transverse permeability at CFX. That means we will have a streamwise permeability at one direction and a transverse permeability at the other two directions (The other two directions have the same permeability). But I'd like to have three different permeability at the three directions. May I ask how to set up three different permeability at the three directions in CFX?
__________________
Best regards, Meimei |
|
April 26, 2013, 09:08 |
|
#2 |
Senior Member
Stuart
Join Date: Jul 2009
Location: Portsmouth, England
Posts: 733
Rep Power: 25 |
I've not tried a simulation to check the results but just did a quick set-up.
How about instead of using a porous domain you use 3 subdomains for the porous region. In each subdomain you set the streamwise direction to be 1 for a particular permeability value and then set no traverse loss, see the images with random values. That way you can input the 3 permeability values for each direction. I'd be interest to know if this works. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
question regarding the codes for setting inlet flow | Alicelin | OpenFOAM Pre-Processing | 4 | November 11, 2009 03:04 |
LiftDrag utility from v12 to v141 | cfdphil | OpenFOAM Running, Solving & CFD | 2 | December 5, 2007 05:49 |
Poisson Solver question | Suresh | Main CFD Forum | 3 | August 12, 2005 04:37 |
Ultra high temperature? | bk | Siemens | 2 | July 19, 2005 00:01 |
Warning 097- | AB | Siemens | 6 | November 15, 2004 04:41 |