rms wallscale monitor stopped in solver

sakurabogoda · May 14, 2013, 10:10

Hi all,

I am running a LES case. While running the simulation, solver crashed (not related to model failure, a server repair). So I started with a backup file.

There I can see now rms wallscale is not monitoring. I used same .def file and nothing changed except used .bak file for initial results.

Can anybody say what is the wrong with this?

Thanks..

evcelica · May 14, 2013, 16:14

Once wallscale reaches convergence it stops monitoring while the rest of the simulation continues. Sometimes it won't even start if it has already been converged in the previous run.

ghorrocks · May 14, 2013, 20:16

The wallscale equation solves the distance from the element to the nearest wall. Once calculated it does not need to be calculated again.

sakurabogoda · May 14, 2013, 21:43

Ok, I got it. Thanks Erik and Glenn.

May 14, 2013, 10:10	rms wallscale monitor stopped in solver	#1
sakurabogoda Senior Member S.Bogoda Join Date: Jul 2012 Posts: 133 Rep Power: 13	Hi all, I am running a LES case. While running the simulation, solver crashed (not related to model failure, a server repair). So I started with a backup file. There I can see now rms wallscale is not monitoring. I used same .def file and nothing changed except used .bak file for initial results. Can anybody say what is the wrong with this? Thanks..

May 14, 2013, 20:16		#3
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	The wallscale equation solves the distance from the element to the nearest wall. Once calculated it does not need to be calculated again. MNMK likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Creating New Solver: For particle-laden compressible jets	sankarv	OpenFOAM Running, Solving & CFD	17	December 3, 2014 19:41
Quarter Burner mesh with periosic condition	SamCanuck	FLUENT	2	August 31, 2011 11:34
Working directory via command line	Luiz	CFX	4	March 6, 2011 20:02
why the solver reject it? Anyone with experience?	bearcat	CFX	6	April 28, 2008 14:08
Error during Solver	cfd guy	CFX	4	May 8, 2001 06:04

May 14, 2013, 16:14		#2
evcelica Senior Member Erik Join Date: Feb 2011 Location: Earth (Land portion) Posts: 1,167 Rep Power: 23	Once wallscale reaches convergence it stops monitoring while the rest of the simulation continues. Sometimes it won't even start if it has already been converged in the previous run.

May 14, 2013, 21:43		#4
sakurabogoda Senior Member S.Bogoda Join Date: Jul 2012 Posts: 133 Rep Power: 13	Ok, I got it. Thanks Erik and Glenn.