CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   Solver Error... (Solution step) (https://www.cfd-online.com/Forums/cfx/119077-solver-error-solution-step.html)

kimjiihoon123 June 9, 2013 11:22

Solver Error... (Solution step)
 
1 Attachment(s)
I'm practicing CFX.
And I'm trying to analyze the Magnus effects on sphere.


I finished Geometry, mesh, setup.
After those steps, I tried to solve it (Solution).

* Solver Settings
Solver - run priority was high.
Run definition - calculate it by double precision.

But it was failed, causing errors below

* The CFX Solver for system Fluid Flow(CFX) did not produce a results file. Detailed inforamtion can be found in the output file for the run.

* Error interpolating results onto the new mesh: C:\Program Files\ANSYS Inc\v140\CFX\bin\winnt-amd64\double\solver-pcmpi.exe
exited with return code 1.

How can I solve it??.............. Please help me guys..

P.S I attached the ouput file code..

ghorrocks June 10, 2013 22:24

The error message says the interpolator is having a problem setting up your initial condition. Did you mean to interpolate from an initial condition? If not switch this option off.


All times are GMT -4. The time now is 12:46.