CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

CFX remeshing error

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 11, 2013, 17:03
Default CFX remeshing error
  #1
New Member
 
Dongwon
Join Date: May 2013
Posts: 10
Rep Power: 12
srobin11 is on a distinguished road
I am doing remeshing stuff. The concept is remeshing, square pipe to retangular tube. I've got the error on remeshing process. Is there anybody have a similar error like this?

un mode: serial run
Host computer: VISIONS13 (PID:3520)
Job started: Tue Jun 11 14:09:03 2013

+================================================= ===================+
| ****** PROBLEM REPORT ****** |
|--------------------------------------------------------------------|
| Subsystem: Input and Output |
| Subroutine name: ErrAction |
| Severity level: Fatal Error |
| Error message number: 001100279 |
|--------------------------------------------------------------------|
| Message: |
| |
| REDHDR: locating dataset failed: what=G/NAMEMAP where=EVERY |
| |
| |
| |
| |
| |
+================================================= ===================+
WARNING: CFXSTP, Regression check error.
+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| Error interpolating results onto the new mesh: C:\Program |
| Files\ANSYS Inc\v140\CFX\bin\winnt\solver-pcmpi.exe exited with |
| return code 1. |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| The following user files have been saved in the directory |
| P:\profile\remesh\support\RRRRE meshing\06112013\remeshing setting |
| 06102013 home\project3region_001: |
| |
| tetra_cmd.log, temp.fbc, 1_newmesh_01.mesh.log, cfx5mondata.out, |
| cfxpre_engine_error.log, temp.fbc_old, temp.uns, 1_remesh.out, |
| 1_oldmesh.res |
+--------------------------------------------------------------------+



I also have error log and it seems like the solver doesn't recognise the boundary during the remshing.

The location of boundary "bottom" is invalid:
Region "BOTTOM" is not recognised.
The location of boundary "inlet" is invalid:
Region "INLET" is not recognised.
The location of boundary "outlet" is invalid:
Region "OUTLET" is not recognised.
The location of boundary "top" is invalid:
Region "TOP" is not recognised.
The location of boundary "wall1" is invalid:
Region "WALL1" is not recognised.
The location of boundary "wall2" is invalid:
Region "WALL2" is not recognised.
srobin11 is offline   Reply With Quote

Old   June 17, 2013, 07:19
Default
  #2
New Member
 
Robert
Join Date: Apr 2013
Posts: 24
Rep Power: 12
Axlex is on a distinguished road
Hey,

it seems to have problems with the generated mesh. If you are using a script for Remeshing, then you can specify commands to save the generated mesh in a specified folder. This gives the opportunity to investigate the new mesh.

Regards
Robert
Axlex is offline   Reply With Quote

Old   June 17, 2013, 15:17
Default
  #3
New Member
 
Dongwon
Join Date: May 2013
Posts: 10
Rep Power: 12
srobin11 is on a distinguished road
Yeah, I think that is problem. Can you explain how to do that? I am new to icem and cfx. Thank you, Robert.

Regards
DW
srobin11 is offline   Reply With Quote

Old   June 18, 2013, 05:27
Default
  #4
New Member
 
Robert
Join Date: Apr 2013
Posts: 24
Rep Power: 12
Axlex is on a distinguished road
OK, good to know that you are using ICEM .

You can save the .tin and .blk files of hexa meshes with the following commands:

ic_hex_save_blocking $blkpath
ic_save_tetin $tinpath 0 0 {} {} 0 0 1

Before you must define the paths with the "set" command

set blkpath "<Path to folder>"
append blkpath <Wanted Filename> .blk

For other things you can record the needed commands in ICEM under File -> Replay Scripts -> Replay Control

Regards
Robert
Axlex is offline   Reply With Quote

Old   April 10, 2014, 19:29
Default
  #5
Senior Member
 
ali
Join Date: Oct 2009
Posts: 318
Rep Power: 17
alinik is on a distinguished road
Hey,

Did you solve this? I am having the same error and it is saying that the location of one of the boundaries(the one that is moving) is not valid.
alinik is offline   Reply With Quote

Old   April 14, 2014, 18:09
Default
  #6
New Member
 
Dongwon
Join Date: May 2013
Posts: 10
Rep Power: 12
srobin11 is on a distinguished road
Hello, have you solved it? It's been a while I've worked on this. I think the issue was there were two bodies that is duplicated(I don't know why the body was copied and generated two identical bodies) in the part tree, when I create the geometry and body in the icem. I deleted one of them, then problem was solved.
srobin11 is offline   Reply With Quote

Old   April 14, 2014, 18:22
Default
  #7
Senior Member
 
ali
Join Date: Oct 2009
Posts: 318
Rep Power: 17
alinik is on a distinguished road
Hi,

thanks for your reply. In the tree in ICEM I can see a "BODY" and there are several other parts that introduced to impose boundary cinditions and there is one "VOFRN".
Which one do you mean I have to delete?
I have been using ICEM for quite a time now and have never had this duplicating bodies problem before.

Thanks,
alinik is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
polynomial thermophysical properties II sebastian OpenFOAM Running, Solving & CFD 54 November 21, 2019 08:12
error compiling modified applications yvyan OpenFOAM Programming & Development 21 March 1, 2016 05:53
Undeclared Identifier Errof UDF SteveGoat Fluent UDF and Scheme Programming 7 October 15, 2014 08:11
CGNS lib and Fortran compiler manaliac Main CFD Forum 2 November 29, 2010 07:25
user defined function cfduser CFX 0 April 29, 2006 11:58


All times are GMT -4. The time now is 02:16.