CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   Geometry Scale in CFX (https://www.cfd-online.com/Forums/cfx/123521-geometry-scale-cfx.html)

a.sarami September 14, 2013 17:11
Geometry Scale in CFX
 
Hi,
I have imported a mesh from ICEM to CFX and noticed that the dimensions are multiplied by some factor. Would you please help me scale my geometry in CFX-Pre?
Cheers
Ali

ghorrocks September 15, 2013 06:49
Use the transform geometry option. You can scale, translate, rotate geometries with this tool.

a.sarami September 15, 2013 10:14
Quote:
Originally Posted by ghorrocks (Post 451794)
Use the transform geometry option. You can scale, translate, rotate geometries with this tool.
Thank you so much, and do you mean "Transform Geometry" option in ICEM or you are referring to any option in CFX-Pre?
Thanks

ghorrocks September 15, 2013 18:12
You can translate in ICEM or CFX-Pre. They both have the option.

sasterror February 7, 2020 14:14
Quote:
Originally Posted by ghorrocks (Post 451875)
You can translate in ICEM or CFX-Pre. They both have the option.
Hello ghorrocks,

How can I scale in CFX-pre ?, I ask because I try to scale in the meshing but it only allows me up for a factor of 1e-3.

Opaque February 7, 2020 16:25
During mesh import you should be able to select the units for the mesh, so CFX-Pre can scale it properly.

After the mesh has been imported, right click on the mesh icon, and select Mesh Transformation, and use the scaling option.


All times are GMT -4. The time now is 20:37.