CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   I wanted to know methodology to determine the boundary conditions simulation radiato (https://www.cfd-online.com/Forums/cfx/126190-i-wanted-know-methodology-determine-boundary-conditions-simulation-radiato.html)

kornengineer November 10, 2013 13:35

I wanted to know methodology to determine the boundary conditions simulation radiato
 
Hi

I had to learn cfx and fluent about 1-2 months.I want to simulation radiator cooling fan drive with free pump. I would like to ask about the boundary conditions at the entrance and exit should be as well.I have already reviewed the research are set out different.

I wanted to know methodology to determine the boundary conditions.

Best Regards/Mr.Winai

ghorrocks November 10, 2013 18:07

You set the boundary conditions to match the physical setup you intend to model. That is the methodology. There is further discussion in the CFX documentation (Under "Choosing Boundary Conditions" I think).


All times are GMT -4. The time now is 11:08.