I wanted to know methodology to determine the boundary conditions simulation radiato

kornengineer · November 10, 2013, 12:35

Hi

I had to learn cfx and fluent about 1-2 months.I want to simulation radiator cooling fan drive with free pump. I would like to ask about the boundary conditions at the entrance and exit should be as well.I have already reviewed the research are set out different.

I wanted to know methodology to determine the boundary conditions.

Best Regards/Mr.Winai

ghorrocks · November 10, 2013, 17:07

You set the boundary conditions to match the physical setup you intend to model. That is the methodology. There is further discussion in the CFX documentation (Under "Choosing Boundary Conditions" I think).

November 10, 2013, 12:35	I wanted to know methodology to determine the boundary conditions simulation radiato	#1
kornengineer New Member Korn Join Date: Aug 2012 Posts: 10 Rep Power: 13	Hi I had to learn cfx and fluent about 1-2 months.I want to simulation radiator cooling fan drive with free pump. I would like to ask about the boundary conditions at the entrance and exit should be as well.I have already reviewed the research are set out different. I wanted to know methodology to determine the boundary conditions. Best Regards/Mr.Winai

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Implementing Boundary conditions for a LES simulation	samurai_01	Main CFD Forum	22	October 3, 2016 13:38
ribbed channel / simpleFoam / boundary conditions	beeo	OpenFOAM Pre-Processing	20	July 17, 2013 08:39
Question about heat transfer coefficient setting for CFX	Anna Tian	CFX	1	June 16, 2013 06:28
An error has occurred in cfx5solve:	volo87	CFX	5	June 14, 2013 17:44
Error finding variable "THERMX"	sunilpatil	CFX	8	April 26, 2013 07:00

November 10, 2013, 17:07		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	You set the boundary conditions to match the physical setup you intend to model. That is the methodology. There is further discussion in the CFX documentation (Under "Choosing Boundary Conditions" I think).