Problem with .trn files on cluster

Janeks · November 14, 2013, 10:54

Hello,

I am doing a transient simulation in CFX on a cluster (no GUI), I make a .def file where I say that I want some .trn files generated, but when the solver finishes, there is only a .res and .out files and nothing more, so I can only get the final time step, not all the rest of .trn files I wanted to generate. It seems that CFX is not generating them. How do I tackle this problem?

Thanks in advance,

Jānis Ratnieks

ghorrocks · November 14, 2013, 16:41

Have a look at your settings for transient results files. Did the simulation go far enough to get to the first transient results file? Did you specify which variables go in it then specify nothing?

November 14, 2013, 10:54	Problem with .trn files on cluster	#1
Janeks New Member Jānis Ratnieks Join Date: Sep 2013 Posts: 2 Rep Power: 0	Hello, I am doing a transient simulation in CFX on a cluster (no GUI), I make a .def file where I say that I want some .trn files generated, but when the solver finishes, there is only a .res and .out files and nothing more, so I can only get the final time step, not all the rest of .trn files I wanted to generate. It seems that CFX is not generating them. How do I tackle this problem? Thanks in advance, Jānis Ratnieks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem of running parallel Fluent on linux cluster	ivanbuz	FLUENT	15	September 23, 2017 19:12
problem in writing/saving files	infinity_28	Main CFD Forum	0	February 6, 2013 11:39
UDF issue	MASOUD	Fluent UDF and Scheme Programming	14	December 6, 2012 13:39
Problem running OF on cluster	Rebecca513	OpenFOAM Running, Solving & CFD	14	August 26, 2012 17:09
OF 1.6 \| Ubuntu 9.10 (64bit) \| GLIBCXX_3.4.11 not found	piprus	OpenFOAM Installation	22	February 25, 2010 13:43

November 14, 2013, 16:41		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Have a look at your settings for transient results files. Did the simulation go far enough to get to the first transient results file? Did you specify which variables go in it then specify nothing?