CCLDatabase Error - CFX-Solver Manager can not launch

ttu004 · December 6, 2013, 06:16

Hi guys

Could anyone tell me how to fix the problem when CFX-Solver Manager can not launch. A CCLDatabase Error message displayed as shown below:

Error sending CCL to database.
CCLAPI::loadCCLData:
CCL parser failed with message:
Perl Syntax errors detected:
syntax error at (eval8) line 3, near "D:/ANSYS workbench/0.75E6@11degree SST Mesh Sensitivity_files/dp0/CFX/CFX/Fluid Flow CFX_003.out';$Mo"
(Might be a runaway multi-line MM string starting on line 2)
Final $ should be \$ or $name at (eval 8) line 2, within string
Final $ should be \$ or $name at (eval 8) line 3, within string
Final $ should be \$ or $name at (eval 8) line 4, within string

This is the first time that I experience this, and I do not quite understand and even know what is the problem?

Thanks if anyone can give me any advice
Tom

ghorrocks · December 7, 2013, 04:11

While the error message is not particularly helpful, it does suggest there is a CCL error (or a perl error if you are using that) in the file it mentions. You need to look at the setup of that file.

chaitanyaarige · October 26, 2015, 07:20

Did you setup the case in higher version of the CFX (like 15 or 16) and tried to open in lower version (13 or 14) ??

Whitebear · February 27, 2019, 19:34

Quote:

Originally Posted by chaitanyaarige

Did you setup the case in higher version of the CFX (like 15 or 16) and tried to open in lower version (13 or 14) ??

Is there any solution about this? I met exactly this problem.

ghorrocks · February 27, 2019, 21:06

The original error appears to be a perl error. So if you have any perl you need to check that. Alternately it could be a CCL error. And this is all stuff I said in my post from 5 years ago

December 6, 2013, 06:16	CCLDatabase Error - CFX-Solver Manager can not launch	#1
ttu004 New Member Tom Join Date: Oct 2013 Location: Auckland, New Zealand Posts: 24 Rep Power: 12	Hi guys Could anyone tell me how to fix the problem when CFX-Solver Manager can not launch. A CCLDatabase Error message displayed as shown below: Error sending CCL to database. CCLAPI::loadCCLData: CCL parser failed with message: Perl Syntax errors detected: syntax error at (eval8) line 3, near "D:/ANSYS workbench/0.75E6@11degree SST Mesh Sensitivity_files/dp0/CFX/CFX/Fluid Flow CFX_003.out';$Mo" (Might be a runaway multi-line MM string starting on line 2) Final $ should be \$ or $name at (eval 8) line 2, within string Final $ should be \$ or $name at (eval 8) line 3, within string Final $ should be \$ or $name at (eval 8) line 4, within string This is the first time that I experience this, and I do not quite understand and even know what is the problem? Thanks if anyone can give me any advice Tom

February 27, 2019, 21:06		#5
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	The original error appears to be a perl error. So if you have any perl you need to check that. Alternately it could be a CCL error. And this is all stuff I said in my post from 5 years ago __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Getting error in CFX solver manager	sunilpatil	CFX	4	August 1, 2012 18:51
Ansys 14 Solver Manager only MPI Local Paralell. No Hp Mpi	Cola1988	ANSYS	0	January 27, 2012 16:58
CFX 5.5	Roued	CFX	1	October 2, 2001 16:49
Setting a B.C using UserFortran in 4.3	tokai	CFX	10	July 17, 2001 16:25
Error during Solver	cfd guy	CFX	4	May 8, 2001 06:04

December 7, 2013, 04:11		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	While the error message is not particularly helpful, it does suggest there is a CCL error (or a perl error if you are using that) in the file it mentions. You need to look at the setup of that file.

October 26, 2015, 07:20		#3
chaitanyaarige New Member Chaitanya Join Date: Aug 2013 Location: Mumbai Posts: 18 Rep Power: 12	Did you setup the case in higher version of the CFX (like 15 or 16) and tried to open in lower version (13 or 14) ??