CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Propeller thrust

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By ghorrocks

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 30, 2013, 04:20
Default Propeller thrust
  #1
New Member
 
stefano
Join Date: Dec 2013
Posts: 4
Rep Power: 12
stroccel is on a distinguished road
Dear all,

I am trying to simulate an APC propeller (low reynolds). I used the two domain method and the Frozen Rotor as indicated in many tutorials. The problem is that I found a thrust one half of the one measured experimentally. I do not understand the boundary condition on the wall of the propeller inside the inner cylindrical volume. Does the inner volume have a rotational velocity opposite to the propeller velocity and the wall fixed respect to the stationary domain?

Thanks a lot,

Regards
Stefano
stroccel is offline   Reply With Quote

Old   December 30, 2013, 05:58
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
Your general question is an FAQ: http://www.cfd-online.com/Wiki/Ansys..._inaccurate.3F

Can you post an image showing what you are talking about with the wall boundary? Also, you might find it useful to view the velocity vectors (both velocity and velcoity in stationary frame) on the wall boundaries so you get a feel for what the different rotation states on a wall give you.
ghorrocks is offline   Reply With Quote

Old   December 30, 2013, 09:46
Default
  #3
New Member
 
stefano
Join Date: Dec 2013
Posts: 4
Rep Power: 12
stroccel is on a distinguished road
Thank you for your replay. I will update the picture. When I speak about wall I intend the surfaces of propeller blades. In fact I build a cylindrical volume with the enclouser function around the propeller and then I subtracted the solid propeller. Then I assign a rotational velocity to the domain but I do not understand in which direction the volume has to rotate (the direction of the propeller or the opposite one?). In addition the wall representing propeller blades surfaces has to rotate togheter with the volume or not?

Regards,

Stefano
stroccel is offline   Reply With Quote

Old   December 30, 2013, 16:55
Default
  #4
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
The propeller domain rotates in the direction of rotation of the propeller. By default walls are assumed to move with their frame of reference (stationary in stationary domains, rotating with the domain in rotating domains). A wall which is stationary but is located in a rotating domain should be set to counter rotating, and a wall which is rotating but is located in a stationary domain should be set to rotating.
stroccel likes this.
ghorrocks is offline   Reply With Quote

Old   January 1, 2014, 09:37
Default
  #5
New Member
 
stefano
Join Date: Dec 2013
Posts: 4
Rep Power: 12
stroccel is on a distinguished road
ok, I tried again with a rotating domain and blades surfaces. I also inserted an inflation boundary with 5 layer of total thikness 2 mm around propeller surfaces. The rotating domain is a cilindrical enclosure around the propeller. The results are not satisfying because the thrust is still 50% lower than the real one and the streamlines in the stationary reference behind the propeller are almost straight and do not roll up. as soon as possible I update pictures.

Thanks a lot

Stefano
stroccel is offline   Reply With Quote

Old   January 2, 2014, 06:12
Default
  #6
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
THis sounds like an FAQ: http://www.cfd-online.com/Wiki/Ansys..._inaccurate.3F
ghorrocks is offline   Reply With Quote

Old   January 4, 2014, 09:57
Default
  #7
New Member
 
stefano
Join Date: Dec 2013
Posts: 4
Rep Power: 12
stroccel is on a distinguished road
refining the mesh and enlarging the stationary domain I got 10.2 N against the 14.5 measured experimentally. The strange thing is that streamlines seem to roll up in the opposite direction respect to the propeller rotation but the direction of thrust and of the flow seems to be right. Next to the oulet (that I defined as opening entrainment) there is a big vortex surrounding the internal flow that has straight streamlines. I am not able to upload pictures. How can I do?

Thank you very much
Regards
Stefano
stroccel is offline   Reply With Quote

Old   January 12, 2014, 06:52
Default
  #8
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
No need for pictures, I think I understand what is happening.

If you have run a finer mesh and a bigger domain and got answers significantly closer to expected that says you are on the right track - you need an even finer mesh and/or a bigger domain and you will get closer still.
ghorrocks is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thrust and torque of a propeller Alex H FLUENT 3 July 1, 2016 18:00
ship propeller thrust performance analysis burak samsul FloEFD, FloWorks & FloTHERM 6 December 4, 2013 07:18
Propeller Thrust distribution cfd_analysis FLUENT 0 July 29, 2013 07:26
Propeller Static thrust asma CFX 1 July 28, 2010 08:56
Propeller thrust at diff. advance ratio (CFX 5.7) Zoltan CFX 9 April 27, 2005 09:23


All times are GMT -4. The time now is 11:06.