CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Electric arc modelling

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By stuart230588

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 28, 2014, 06:41
Default Electric arc modelling
  #1
New Member
 
Join Date: Oct 2013
Posts: 25
Rep Power: 12
stuart230588 is on a distinguished road
Hi,

I am trying to simulate an electric arc but having trouble applying the boundary conditions.

I can get the simulation to work by applying a voltage difference to the anode and cathode surfaces, however I would like to have the load applied as a total current.

When I try to apply an electrical current (through the flux in option) in the electrical field, my model always fails. When I check my monitor points, the temperature has gone massively higher than it should (by a factor of about E8).

What is the best way to apply a total current source?

Thanks
kada likes this.
stuart230588 is offline   Reply With Quote

Old   March 28, 2019, 08:45
Default
  #2
New Member
 
kada
Join Date: Feb 2019
Posts: 6
Rep Power: 7
kada is on a distinguished road
Hi,

I am trying to simulate an electric arc between 02 contacts (anode/cathode) with fluent (MHD) but i having trouble applying the boundary conditions.
after separation of conatct , i have deference the potenc 48 v
kada is offline   Reply With Quote

Old   March 28, 2019, 17:47
Default
  #3
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,655
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
Try the Fluent forum, this is the CFX forum. Also, don't forget to actually ask a question, your post does not actually ask a question.
__________________
Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.
ghorrocks is offline   Reply With Quote

Reply

Tags
current density, electric field, mhd, mhd problem

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] snappyHexMesh and cyclic boundaries Ruli OpenFOAM Meshing & Mesh Conversion 2 December 9, 2013 07:51
[Other] mergeMatchPairs with arcs vainilreb OpenFOAM Meshing & Mesh Conversion 1 August 5, 2013 09:11
[blockMesh] multiregion mesh with blockMesh alvora OpenFOAM Meshing & Mesh Conversion 44 July 21, 2013 15:14
[blockMesh] apparently the mesh doesn't want to be created in one direction Maxime Thomas OpenFOAM Meshing & Mesh Conversion 1 August 18, 2012 07:05
[blockMesh] error EOF in blockMesh Ahmed Khattab OpenFOAM Meshing & Mesh Conversion 7 May 17, 2012 01:37


All times are GMT -4. The time now is 22:10.