Irrelevant thread which is best ignored

September 11, 2006, 01:37

i'm a studen in University in indonesia. i want to ask a question abaut CFD. what is CFD and the application ? i wand the program of CFD, would You give me?/// thanks.....

September 11, 2006, 10:02

CFX offers a very low cost academic package ... no need to steal.

saran15 · February 13, 2012, 05:13

how to calculate thrust in fluent for nozzle

ghorrocks · February 13, 2012, 06:25

Nice one - hijack a thread on software piracy and ask a question which does not belong on this forum.

In future start a new thread for new questions, and post them in the appropriate forum. This is the CFX forum.

Graham81 · February 13, 2012, 06:29

Classic stuff

sumsurya30 · November 7, 2013, 00:02

dear sir,

i am working on thermal cooling of 2 capacitor banks, where i have kept 2 fans in between the banks.

i have the fan curves with me. so i need to input the data points from the curve into fluent .

what is the right way for it?
please help

Lance · November 7, 2013, 01:59

This thread is getting better and better...
You really didnt read post #4?

mt.nd · December 1, 2013, 07:40

Hi,
how specify my materials before meshing???
i use DesignModeles, Ansys Meshing, cfx Ansys 14.5
Thank you in advance!

flotus1 · December 1, 2013, 10:57

+1 for hijacking the thread with one of the most absurd questions on the forum that had already been hijacked by two other guys who then got laughed at.
Why arent threads like this one closed or even deleted? Ok at first its kind of funny, but it also sheds a bad light on the community.

ghorrocks · December 1, 2013, 16:24

I generally only delete threads which are offensive, spam, discussing piracy or duplicates of other threads. I am reluctant to raise the bar to also delete threads which are just a bit stupid because it would be a bunch of extra work for me and it also makes the decision to delete much more of a value judgement and my judgement might not agree with somebody else.

So I agree that some silly threads probably should be deleted, but in general they sink to the bottom of the forum and are ignored anyway. But I agree that this one seems to defy gravity and keeps bubbling along, unfortunately......

raghuram.rapeti@gmail.com · April 1, 2014, 05:05

hi,
Iam using fluent for a simple analysis. I have created an annular tube. From one end I have entered water with some temperature and from other end i have sent air with some temperature in annular space but i didn't get any heat exchange distribution in post processing. Can anybody help me?

Lance · April 1, 2014, 05:07

As I said before...

Quote:

Originally Posted by Lance

This thread is getting better and better...
You really didnt read post #4?

Antanas · April 1, 2014, 05:26

Quote:

Originally Posted by Lance

As I said before...

Haha you're right it's getting real funny. Let me contribute a little. I've a cow and i want to know how often should I milk it to increase milk output. Thanks!

PS Isn't today a April Fools' day? LOL

flotus1 · April 1, 2014, 05:53

I just checked, this thread is one of the first results when you google cfd ask question.
But I am not sure if it is really a coincidence that today is the first of April-.

brunoc · April 1, 2014, 14:02

Quote:

Originally Posted by Antanas

Haha you're right it's getting real funny. Let me contribute a little. I've a cow and i want to know how often should I milk it to increase milk output. Thanks!

PS Isn't today a April Fools' day? LOL

Antanas,
I got you covered:
http://en.lmgtfy.com/?q=how+to+incre...duction+%2Bcow

Also:
http://en.lmgtfy.com/?q=cfd+ask+question
Yep, it's right in there.

Glenn, if you can, you should rename this thread so Google stop directing people here.

ghorrocks · April 1, 2014, 18:33

There we are. I have "corrected" the name of this thread

As for your milk production question - you will never know unless you do a mesh sensitivity study on it. But I doubt you will get your cow to agree to that, however.

evcelica · April 1, 2014, 21:15

Haha. Good April fools thread.

Brunoc, that's hilarious, how did you do that with the "let me google that for you"

And you better not send me a "let me google that for you" link to show me!!!

brunoc · April 2, 2014, 18:11

Hey Erik: http://bit.ly/17NJbeY
(sorry, had to be done

)

Back to your question, just visit http://lmgtfy.com/ and follow the instructions. It's a nice thing to send to your friends when they ask you things easily available in google.

evcelica · April 2, 2014, 20:53

Quote:

Originally Posted by brunoc

Hey Erik: http://bit.ly/17NJbeY
(sorry, had to be done

)

Back to your question, just visit http://lmgtfy.com/ and follow the instructions. It's a nice thing to send to your friends when they ask you things easily available in google.

HaHa, Thanks, I knew I could google it easily

I'm going to use this at every opportunity, I'm just a jerk like that.

September 11, 2006, 01:37	Irrelevant thread which is best ignored	#1
defis_marekhan Guest Posts: n/a	i'm a studen in University in indonesia. i want to ask a question abaut CFD. what is CFD and the application ? i wand the program of CFD, would You give me?/// thanks.....

September 11, 2006, 10:02	Re: ask question.....	#2
Joe Guest Posts: n/a	CFX offers a very low cost academic package ... no need to steal.

February 13, 2012, 05:13	how to calculate thrust in fluent for nozzle	#3
saran15 New Member saravanan Join Date: Oct 2011 Posts: 2 Rep Power: 0	how to calculate thrust in fluent for nozzle

December 1, 2013, 07:40	multiple fluid in cfx	#8
mt.nd New Member MRT Join Date: Oct 2013 Posts: 5 Rep Power: 12	Hi, how specify my materials before meshing??? i use DesignModeles, Ansys Meshing, cfx Ansys 14.5 Thank you in advance!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

February 13, 2012, 06:25		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,694 Rep Power: 143	Nice one - hijack a thread on software piracy and ask a question which does not belong on this forum. In future start a new thread for new questions, and post them in the appropriate forum. This is the CFX forum.

February 13, 2012, 06:29		#5
Graham81 Member Join Date: Dec 2009 Posts: 57 Rep Power: 16	Classic stuff

November 7, 2013, 00:02		#6
sumsurya30 New Member Tamil Nadu Join Date: Oct 2013 Posts: 1 Rep Power: 0	dear sir, i am working on thermal cooling of 2 capacitor banks, where i have kept 2 fans in between the banks. i have the fan curves with me. so i need to input the data points from the curve into fluent . what is the right way for it? please help

November 7, 2013, 01:59		#7
Lance Senior Member Lance Join Date: Mar 2009 Posts: 669 Rep Power: 22	This thread is getting better and better... You really didnt read post #4?

December 1, 2013, 10:57		#9
flotus1 Super Moderator Alex Join Date: Jun 2012 Location: Germany Posts: 3,398 Rep Power: 46	+1 for hijacking the thread with one of the most absurd questions on the forum that had already been hijacked by two other guys who then got laughed at. Why arent threads like this one closed or even deleted? Ok at first its kind of funny, but it also sheds a bad light on the community.

December 1, 2013, 16:24		#10
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,694 Rep Power: 143	I generally only delete threads which are offensive, spam, discussing piracy or duplicates of other threads. I am reluctant to raise the bar to also delete threads which are just a bit stupid because it would be a bunch of extra work for me and it also makes the decision to delete much more of a value judgement and my judgement might not agree with somebody else. So I agree that some silly threads probably should be deleted, but in general they sink to the bottom of the forum and are ignored anyway. But I agree that this one seems to defy gravity and keeps bubbling along, unfortunately......

April 1, 2014, 05:05		#11
raghuram.rapeti@gmail.com New Member Raghu Ram Join Date: Mar 2014 Posts: 1 Rep Power: 0	hi, Iam using fluent for a simple analysis. I have created an annular tube. From one end I have entered water with some temperature and from other end i have sent air with some temperature in annular space but i didn't get any heat exchange distribution in post processing. Can anybody help me?

April 1, 2014, 05:53		#14
flotus1 Super Moderator Alex Join Date: Jun 2012 Location: Germany Posts: 3,398 Rep Power: 46	I just checked, this thread is one of the first results when you google cfd ask question. But I am not sure if it is really a coincidence that today is the first of April-.

April 1, 2014, 18:33		#16
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,694 Rep Power: 143	There we are. I have "corrected" the name of this thread As for your milk production question - you will never know unless you do a mesh sensitivity study on it. But I doubt you will get your cow to agree to that, however.

April 1, 2014, 21:15		#17
evcelica Senior Member Erik Join Date: Feb 2011 Location: Earth (Land portion) Posts: 1,167 Rep Power: 23	Haha. Good April fools thread. Brunoc, that's hilarious, how did you do that with the "let me google that for you" And you better not send me a "let me google that for you" link to show me!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
udf problem	jane	Fluent UDF and Scheme Programming	37	February 20, 2018 04:17
Guide: Getting Started with the CFD Online Discussion Forums	pete	Site Help, Feedback & Discussions	8	July 29, 2016 05:00
Error messages	atg	enGrid	7	August 30, 2013 11:16
Please check out my parallelized udf code	aleisia	Fluent UDF and Scheme Programming	0	June 10, 2011 16:16
Phase locked average in run time	panara	OpenFOAM	2	February 20, 2008 14:37

April 2, 2014, 18:11		#18
brunoc Senior Member Bruno Join Date: Mar 2009 Location: Brazil Posts: 277 Rep Power: 21	Hey Erik: http://bit.ly/17NJbeY (sorry, had to be done ) Back to your question, just visit http://lmgtfy.com/ and follow the instructions. It's a nice thing to send to your friends when they ask you things easily available in google.