Starting a URANS computation from RANS result file

AS_Aero · August 30, 2018, 03:38

Hi
I am trying to start a case with transient simulation (URANS) which ran for 1000 Iterations in RANS and I have the result file. From this I want to start my URANS simulation. Can someone tell me where I should give this RANS result file as input ?

I have this job Submission file where there is a command line for CFX Arguments
CFXARGS = "-def filename.def -ccl fileneame.ccl -double -size-mms 2.0"

Should I insert the result file here as well ?
Since I give the result file from RANS as input I dont have to initialize the URANS domain right ?

Kindly let me know what is the process.

Lance · August 30, 2018, 03:51

If your result file is called resultfile.res then add the following arguments (see manual)
-initial-file resultfile.res
or
-continue-from-file resultfile.res

no need for initialization if you use a .res or .trn file as initial values.

AS_Aero · August 30, 2018, 05:31

Perfect Thanks a lot

ghorrocks · August 30, 2018, 06:29

For future reference: For just about any command line tool if you go "<executable> -help" it will list all the available options for the tool.

Alternately, in the CFX documentation there is a section on command line tools which describes all the options with additional detail.

August 30, 2018, 03:38	Starting a URANS computation from RANS result file	#1
AS_Aero Senior Member Join Date: Mar 2013 Location: Germany Posts: 357 Rep Power: 14	Hi I am trying to start a case with transient simulation (URANS) which ran for 1000 Iterations in RANS and I have the result file. From this I want to start my URANS simulation. Can someone tell me where I should give this RANS result file as input ? I have this job Submission file where there is a command line for CFX Arguments CFXARGS = "-def filename.def -ccl fileneame.ccl -double -size-mms 2.0" Should I insert the result file here as well ? Since I give the result file from RANS as input I dont have to initialize the URANS domain right ? Kindly let me know what is the process.

August 30, 2018, 06:29		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	For future reference: For just about any command line tool if you go "<executable> -help" it will list all the available options for the tool. Alternately, in the CFX documentation there is a section on command line tools which describes all the options with additional detail. __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFoam "Permission denied" and "command not found" problems.	iyidaniel@yahoo.co.uk	OpenFOAM Running, Solving & CFD	11	January 2, 2018 06:47
what is swap4foam ??	AB08	OpenFOAM	28	February 2, 2016 01:22
[swak4Foam] Problem installing swak_2.x for OpenFoam-2.4.0	towanda	OpenFOAM Community Contributions	6	September 5, 2015 21:03
[swak4Foam] Error bulding swak4Foam	sfigato	OpenFOAM Community Contributions	18	August 22, 2013 12:41
"parabolicVelocity" in OpenFoam 2.1.0 ?	sawyer86	OpenFOAM Running, Solving & CFD	21	February 7, 2012 11:44

August 30, 2018, 03:51		#2
Lance Senior Member Lance Join Date: Mar 2009 Posts: 669 Rep Power: 22	If your result file is called resultfile.res then add the following arguments (see manual) -initial-file resultfile.res or -continue-from-file resultfile.res no need for initialization if you use a .res or .trn file as initial values.

August 30, 2018, 05:31		#3
AS_Aero Senior Member Join Date: Mar 2013 Location: Germany Posts: 357 Rep Power: 14	Perfect Thanks a lot