![]() |
Iteration List in Transient Statistics
Dear all,
I am trying to understand start and stop iteration list in transient statistics. I looked at the CFX help documents, it says that The start iteration for a given transient statistic specifies the timestep index at which statistic accumulation begins. Lets say that I run my model for 1 [s] with time step of 0.1 [s] and I want to calculate the transient statistics between 0.4 and 0.6 [s], then the start and stop iteration list would be Start Iteration List: 5 Stop Iteration List: 7 Please let me know if I am wrong. Thanks AshtonJ |
Unfortunately it isn't very clear. I suspect what you wrote is correct. My suggestion is do a quick transient pipe flow problem with and without the transient statistics method you mentioned and see what happens.
|
part of all transient statistics
Hello and how are you?
I modeled a vessel with 10 bits of heart. But, I did not save all the fluid information in all times(except end bit of heart). I checked the transient statistics for WSS(WHIT OUT initialize and stop section). Now I wanna draw the contour of average of WSS on a surface in end bit off heart(NOT all the time of simulation which I checked before). Exactly what should I do? |
All times are GMT -4. The time now is 14:57. |