CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   ICEM grids cell directly linked and output to CFX pre cell in Workbench (https://www.cfd-online.com/Forums/cfx/150450-icem-grids-cell-directly-linked-output-cfx-pre-cell-workbench.html)

Pierre1 March 22, 2015 20:58
ICEM grids cell directly linked and output to CFX pre cell in Workbench
 
I use ICEM to generate structured grids,CFX as the solver, Workbench to run the simulations and ‘Design points’ table to out put the simulations results.

I us

Pierre1 March 24, 2015 22:12
Quote:
Originally Posted by Pierre1 (Post 537745)
I use ICEM to generate structured grids,CFX as the solver, Workbench to run the simulations and ‘Design points’ table tooutput the simulations results.

I usually need to change my grids thenrerun the simulation. In this case, after I change the grids, I will always needto open CFX pre from Workbench and import the grids manually.

I notice that Fluent and ICEM cells can belinked in Workbench. In this way once I change grids in Workbench ICEM cell,the grids will be updated to Fluent automatically. I’m wondering is it possibleto link ICEM cell and CFX cell as well in Workbench?
Could anyone help on this question?

Pierre1 March 26, 2015 09:22
Quote:
Originally Posted by Pierre1 (Post 538060)
Could anyone help on this question?
Is there a way to link ICEM cell and CFX pre cell in Workbench?


All times are GMT -4. The time now is 21:23.