cfx turbulent model

yaseen wsu · January 9, 2016, 10:06

Dear all I have two questions:
1- I use CFX I want to use (RNG) model but I do not find it, fluent has this model but in cfx I can not find it.
2- from the upstream of my model (flow over spillway) I know height of water but I dont know velocity of inlet, what I should do?.
thanks

supersweet · January 9, 2016, 13:51

Try enabling the beta models

eng_norouzi · January 13, 2016, 23:47

if you know the inlet and outlet pressure of your case you can solve it, you don't necessarily need to have the inlet velocity.

ghorrocks · January 14, 2016, 01:52

RNG - you might need the advanced turbulence license to access this. Do you have an advanced turbulence license option (or a full capability solver license)?

If you know the water height but not the flow then use a pressure boundary condition. Have a look at the CFX tutorials for how to implement pressure boundaries in free surface models.

January 9, 2016, 10:06	cfx turbulent model	#1
yaseen wsu Senior Member yaseen Join Date: Oct 2015 Location: Hawler Posts: 174 Rep Power: 9	Dear all I have two questions: 1- I use CFX I want to use (RNG) model but I do not find it, fluent has this model but in cfx I can not find it. 2- from the upstream of my model (flow over spillway) I know height of water but I dont know velocity of inlet, what I should do?. thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to obtain turbulent kinetic energy data from LES model of Ansys CFX?	rsin	CFX	19	December 29, 2018 04:43
Difference between Fluent transitional model and CFX transitional model	Anna Tian	FLUENT	2	August 7, 2014 10:52
porous media turbulent model P-dL, I get the different results? is the model wrong?	hitchenxue	FLUENT	0	July 13, 2014 05:57
An error has occurred in cfx5solve:	volo87	CFX	5	June 14, 2013 17:44
CAD model sliver faces - CFX Mesh - Parasolid?	Ianto	CFX	3	February 8, 2009 18:32

January 9, 2016, 13:51		#2
supersweet New Member jack sparrow Join Date: Jan 2015 Posts: 16 Rep Power: 10	Try enabling the beta models

January 13, 2016, 23:47		#3
eng_norouzi Member ali Join Date: Feb 2011 Posts: 37 Rep Power: 14	if you know the inlet and outlet pressure of your case you can solve it, you don't necessarily need to have the inlet velocity.

January 14, 2016, 01:52		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,473 Rep Power: 140	RNG - you might need the advanced turbulence license to access this. Do you have an advanced turbulence license option (or a full capability solver license)? If you know the water height but not the flow then use a pressure boundary condition. Have a look at the CFX tutorials for how to implement pressure boundaries in free surface models.