section discharge vs time

saravenu · January 15, 2016, 04:29

HI=)
I would like to plot the discharge of one fluid through a section vs time (i.e the hydrograph). But the problem is that transient graphs allow to plot variables vs time just in one point.
I tried the following procedure but I don't think the result I get makes sense..Can you suggest me another strategy? This is what I did:
in the post processing I defined an expression "discharge" which compute the discharge as the area integral of the fluid velocity in the section of interest:
discharge=areaInt(fluid1.Velocity)@last section before the dam
then I created a graph specifying:
graph type: transient
data source: the expression discharge
x axe: the time variable
at this point I suppose the programme will plot the discharge in function of time but actually I have to specify also the y axe variable. This make me think I am not on the right road..
Thanks a lot for your help!
Sara

ghorrocks · January 15, 2016, 05:45

If you don't like the way CFD-Post does charting then export the data and use a graphing package you are familiar with. Things like excel, matlab, tecplot, python, gnuplot and many others are much easier to use and have more features.

January 15, 2016, 04:29	section discharge vs time	#1
saravenu New Member Sara Join Date: Dec 2015 Posts: 1 Rep Power: 0	HI=) I would like to plot the discharge of one fluid through a section vs time (i.e the hydrograph). But the problem is that transient graphs allow to plot variables vs time just in one point. I tried the following procedure but I don't think the result I get makes sense..Can you suggest me another strategy? This is what I did: in the post processing I defined an expression "discharge" which compute the discharge as the area integral of the fluid velocity in the section of interest: discharge=areaInt(fluid1.Velocity)@last section before the dam then I created a graph specifying: graph type: transient data source: the expression discharge x axe: the time variable at this point I suppose the programme will plot the discharge in function of time but actually I have to specify also the y axe variable. This make me think I am not on the right road.. Thanks a lot for your help! Sara

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMI speed performance	danny123	OpenFOAM	21	October 24, 2020 04:13
[solidMechanics] solidMechanics gear contact in rotation	nlc	OpenFOAM CC Toolkits for Fluid-Structure Interaction	3	January 11, 2015 06:41
pisoFoam with k-epsilon turb blows up - Some questions	Heroic	OpenFOAM Running, Solving & CFD	26	December 17, 2012 03:34
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3	bookie56	OpenFOAM Installation	8	August 13, 2011 04:03
Orifice Plate with a fully developed flow - Problems with convergence	jonmec	OpenFOAM Running, Solving & CFD	3	July 28, 2011 05:24

January 15, 2016, 05:45		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	If you don't like the way CFD-Post does charting then export the data and use a graphing package you are familiar with. Things like excel, matlab, tecplot, python, gnuplot and many others are much easier to use and have more features.