Problem Exporting results from CFX Solver Manager

anairene_c · January 21, 2016, 12:23

Hi,
I have got this problem:
I run simulations in CFX and I need to export the results as an Ensight case. I am doing it using Export in the CFX Solver Manager and choosing Ensight Format. For one of the cases, I opened Export, then choose the results file but I can't see any time step. In the other cases always I could see all the times steps, but for this one none of them.

Any idea how to solve this strange problem?
Regards,
Ana

monkey1 · January 22, 2016, 01:50

Question might seem a little stupid / obvious, but:
Did you check, that in you really have .trn-Files in the results folder?

anairene_c · January 22, 2016, 12:32

of course. Anyway, I already solve the problem. Restarted the computer. the strange part was that after it did not work i opened another set of results and it worked. Also opened the results with Ensight and it showed all the time steps. Think that was just a bad day for the pc!

January 21, 2016, 12:23	Problem Exporting results from CFX Solver Manager	#1
anairene_c New Member Anis Join Date: Jul 2013 Posts: 4 Rep Power: 12	Hi, I have got this problem: I run simulations in CFX and I need to export the results as an Ensight case. I am doing it using Export in the CFX Solver Manager and choosing Ensight Format. For one of the cases, I opened Export, then choose the results file but I can't see any time step. In the other cases always I could see all the times steps, but for this one none of them. Any idea how to solve this strange problem? Regards, Ana

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFX Solver manager runs for a long time!!	Amoul	CFX	11	May 15, 2013 04:05
solver stop problem in Lagrangian Particle Tracking	sakurabogoda	CFX	3	October 5, 2012 06:09
Getting error in CFX solver manager	sunilpatil	CFX	4	August 1, 2012 18:51
CFX solver Convegence Problem	wangy1767	CFX	1	July 2, 2012 07:51
Working directory via command line	Luiz	CFX	4	March 6, 2011 20:02

January 22, 2016, 01:50		#2
monkey1 Senior Member Join Date: Jul 2011 Location: Berlin, Germany Posts: 173 Rep Power: 14	Question might seem a little stupid / obvious, but: Did you check, that in you really have .trn-Files in the results folder?

January 22, 2016, 12:32		#3
anairene_c New Member Anis Join Date: Jul 2013 Posts: 4 Rep Power: 12	of course. Anyway, I already solve the problem. Restarted the computer. the strange part was that after it did not work i opened another set of results and it worked. Also opened the results with Ensight and it showed all the time steps. Think that was just a bad day for the pc!