|
[Sponsors] |
Exporting points in the .rtzt format from DesignModeler |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 13, 2023, 03:56 |
Exporting points in the .rtzt format from DesignModeler
|
#1 |
New Member
KristianRanta
Join Date: Oct 2016
Location: Sundsvall
Posts: 25
Rep Power: 9 |
I am trying to export the meanline profile of the CAD blade in the .rtzt format that can be read by BladeGen. The ExportPoints options (see picture) in the BladeGen seems to allow exporting the profile in the required format. However, I am unsure what the Blade option highlighted in yellow requires. The turbosystems guide describes this option as below, which is not particularly helpful.
Code:
[Blade feature selection] Select a blade to indicate the blade row for which data is to be exported |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Invalid Normals for source face to target face while making AMI? | Sorabh | OpenFOAM Meshing & Mesh Conversion | 1 | August 3, 2021 06:35 |
SU2-7.0.1 on ubuntu 18.04 | hyunko | SU2 Installation | 7 | March 16, 2020 04:37 |
[snappyHexMesh] layer not added | Rasmusiwersen | OpenFOAM Meshing & Mesh Conversion | 1 | January 2, 2020 09:43 |
[blockMesh] BlockMeshmergePatchPairs | hjasak | OpenFOAM Meshing & Mesh Conversion | 11 | August 15, 2008 07:36 |
XYZ (ASCII format) data points into GAMBIT | Neil | FLUENT | 1 | August 7, 2007 09:24 |