Euler -Lagrangian issue
 

Dear all
I am doing a flow analysis through a venturi tube. I have three phases i.e. air, water and particles. So when I used the Euler-Euler approach with air as a continuous phase and water, particles considered as a dispersed phase then I have obtained the fine results. But I also want to do the tracking of particles with Lagrangian approach to see the difference in results but there is an error occurs i.e.

ERROR #001100279 has occurred in subroutine ErrAction. |
| Message: |
| Floating point exception: Overflow

So what is the problem. Plz sort me out I shall be very thankful.

FAQ; http://www.cfd-online.com/Wiki/Ansys...do_about_it.3F

Thanks ghorrocks I will try the following option and will let you know.