How to get results on specific area
1 Attachment(s)
Dear colleagues,
How to get pressure information/results on specific area? Please refer to attached picture. I need to know pressure on each hole no.1, 2, and 3. Thank you in advance for your help. Regards, C.Moca |
in Post create a plane for each of the holes and evaluate your pressure etc on/through those planes.
|
Or if a point measure of pressure is OK then put a monitor point on it (if you are in the solver) or a point on it (if you are in CFD-Post). This is simpler than planes, but only gives you pressure at a point.
|
All times are GMT -4. The time now is 20:35. |